Cement Prefabricated House Slope Roof

Key points regarding the slope roof of cement prefabricated houses are as follows:

I. Application of Prefabricated Panels There are cases where 5-hole prefabricated panels are used for slope roofs. During construction, these 5-hole prefabricated panels are neatly arranged on the slope. To prevent the panels from sliding off, special treatments are required at the ends, such as adding fixing devices or adopting anti-slip structural designs to ensure structural stability.

II. Key Points of the Construction Plan

1. Project Overview
   • Suitable for 1-2 story buildings, the designed slope of the roof is 1:2.5, which can meet drainage requirements while also taking into account the building's aesthetics and structural stability.
   • The process combines prefabricated components with cast-in-place nodes. By using cast-in-place nodes, the overall integrity of the house is enhanced, and its seismic performance is improved. It must comply with the local seismic fortification intensity requirements.
2. Construction Preparation
   • Technical Preparation: It is necessary to conduct a drawing review to clarify key information such as the specifications and connection methods of the prefabricated components. Technical disclosures should be carried out to ensure that construction personnel grasp the key points of construction. Measurement and setting-out should be completed to determine the building's planar position, elevation, and axis control network.
   • Material Preparation: Prefabricated components should be customized by qualified manufacturers, and their quality should be regularly inspected. Auxiliary materials (such as connectors and waterproof materials) should have qualified certification documents and undergo strict inspection and acceptance.

III. Material Selection Suggestions for Converting Flat Roofs to Slope Roofs in Old Houses Converting flat roofs to slope roofs in old houses is a roof structural renovation project that requires strict control of the additional load. Due to the limited bearing capacity of the original walls and beams in old houses, lightweight roof tiles should be preferred, such as colored stone metal tiles:

• Lightweight: Each square meter weighs only 5-8 kilograms, which is only 1/6 of that of traditional cement tiles. This can reduce the load-bearing pressure on old houses and avoid the need for large-scale reinforcement of the original structure.
• Superior Performance: They have a scientific lap joint design, ensuring reliable waterproofing. They also have heat insulation functions, improving the living experience. They come in a variety of styles and colors to meet aesthetic needs.
• Efficient Construction: The installation speed is fast, which can shorten the construction period and reduce the impact on residents' lives. If other materials are used, structural calculations must be carried out to verify their safety and ensure that the load on the renovated roof does not exceed the original design bearing capacity.