Can the Toilet Position Be Moved?

The toilet position can be moved, but appropriate methods need to be selected according to specific circumstances, and relevant precautions should be taken.

Traditionally, once a toilet is installed, it is not easily moved. However, with technological advancements, it is now possible to move it. Common situations requiring relocation include: the toilet being directly opposite the door, which is aesthetically unpleasing; the original toilet position affecting the bathroom layout; or incorrect reserved pit distances. The relocation methods vary depending on the drainage system:

• Inter-floor drainage: For distances within half a meter, a Geberit toilet position shifter can be used; for distances exceeding half a meter, a 90mm round pipe should be used to reconstruct the drainage pipeline, with a reserved slope of 1%-2.6%, and the relocation distance should not be too long. After relocation, it is not recommended to use a siphon toilet; instead, a wall-mounted or straight-flush toilet is suggested. This is because siphon toilets have higher requirements for the slope and smoothness of the drainage pipeline, and relocation may not meet their working conditions, leading to issues such as blockages. In contrast, wall-mounted or straight-flush toilets are more adaptable to the drainage conditions after relocation.
• Same-floor drainage: By installing a quick tee on the riser and drilling a hole, free relocation can be achieved. This method is relatively flexible, with minimal changes to the overall bathroom structure and relatively low construction difficulty.

Common relocation methods also include:

• Adding a toilet position shifter: Small-scale relocation within 1 centimeter is feasible. If the distance exceeds 1 meter, the probability of blockages doubles. In this case, a channel-type toilet position shifter should be selected, and construction should be carried out after tiling, with a 5-centimeter drop reserved in the pipeline. This ensures smooth drainage of sewage and reduces the risk of blockages.
• Raising the floor: Suitable for long-distance relocation, a slope should be created to prevent blockages. By raising the floor to form a certain slope, sewage can flow naturally under gravity, thus avoiding blockages.
• Sunken bathroom: The pipeline can be freely adjusted, or a wall-hung toilet can be used. Its newly introduced flat trap design is only 8 centimeters thick and does not take up much space, allowing for relocation up to 3 meters without blockages. The special structure of a sunken bathroom provides convenient conditions for pipeline adjustment, while the flat trap design of the wall-hung toilet effectively solves the drainage problem after relocation.

Before relocation, a plan should be determined, and after relocation, waterproofing work should be done well. It is best to hire professionals to ensure the quality and safety of the relocation project.