Back to blog
Article
Air-Water Flush Mobile Toilet
Admin October 05, 2026
Air-water flush mobile toilets are mainly divided into two types: single-unit air-water flush mobile toilets and high-pressure air-water flush mobile toilets. Here is a detailed introduction:

Single-Unit Air-Water Flush Mobile Toilet
- Suitable Locations: Starting at 200 yuan, these toilets are suitable for places such as markets, parks, stations, large event venues, and tourist attractions. These locations have high foot traffic and a high demand for sanitary facilities. Single-unit air-water flush mobile toilets can meet basic toilet needs and are relatively easy to install and move.
- Ventilation Design: The ventilation design is good, with air vents located on the front door and above the walls to allow air circulation inside the toilet. Good ventilation can effectively reduce odors in the toilet, improve user comfort, and avoid problems such as stuffiness and odors caused by poor air circulation.
- Fecal Treatment Method: It uses a septic tank for degradation treatment. The septic tank can initially decompose and treat feces, reducing environmental pollution and facilitating subsequent cleaning and transportation.
High-Pressure Air-Water Flush Mobile Toilet
- Flushing Principle: It flushes the inner walls of the toilet bowl with high-pressure water flow and gas. The flushing pressure is high and the range is wide, allowing the toilet bowl to be thoroughly flushed clean with only one-fifth of the water used by a regular water-flush toilet. This flushing method not only saves water but also ensures the cleanliness of the toilet bowl.
- Flushing Control Method: It is controlled by an infrared sensor in combination with a computerized intelligent control system, requiring no manual operation during use, and is equipped with an emergency flushing button. The intelligent control system can automatically flush according to user needs, improving convenience. The emergency button ensures normal use in case of a malfunction in the intelligent system.
- Internal Configuration: The toilet is equipped with a high-pressure air source inside, which uses high-pressure air to increase water pressure, replacing the water pump. It also uses a pressure regulating valve to control the pressure and adjust the water output. This design reduces the failure rate of the equipment and improves system stability.
- Features: It has the advantages of super water-saving (only 0.65 liters of water per flush), using wall-attached jet technology for dead-zone-free flushing, being equipped with an emergency flushing device, having a forced downward exhaust system that can completely deodorize fecal sources and the interior, requiring no chemical additives, having no user limit, and having extremely low maintenance costs.
Related




