Yangjiang Single Mobile Toilet Specifications
The common specifications of single mobile toilets in Yangjiang can be divided into the following types, with specific parameters and applicable scenarios as follows:
1. Standard Single-Person Model The dimensions are typically 110cm in length, 110cm in width, and 230cm in height (i.e., 1.1m×1.1m×2.3m), with a possible error of ±5cm for some products. This specification is characterized by high space utilization and stable structure, internally equipped with a standard squat toilet or sit toilet, an independent ventilation system, and simple lighting equipment. It is suitable for scenarios such as ordinary parks, temporary locations at construction sites, and community event venues, meeting the daily needs of a single person and facilitating easy transportation and rapid installation.
2. Mini Single-Person Model With dimensions of 100cm in length, 100cm in width, and 220cm in height (i.e., 1m×1m×2m), this is a compact product designed for space-constrained scenarios. Its internal layout optimizes the distribution of functional areas, for example, using folding doors or built-in water tanks to reduce the floor space. It is commonly found in small exhibitions, commercial streets, temporary markets, and other areas with high foot traffic but limited space, effectively alleviating usage pressure during peak periods while reducing the space occupied in the surrounding environment.
3. Barrier-Free Model The dimensions are typically 180cm in length, 150cm in width, and 240cm in height (i.e., 1.5m×1.8m×2.4m), with some products possibly extending to 2m in length and 1.8m in width. This specification strictly adheres to barrier-free design standards, with a reserved wheelchair turning space (diameter ≥1.5m) inside, equipped with handrails, a low-positioned washbasin, and an emergency call device, and a door width of ≥90cm to facilitate wheelchair access. It is suitable for public places such as scenic spots, large stadiums, and transportation hubs that need to accommodate the needs of special groups, reflecting a human-centered design concept.
4. Basic Single-Person Unit (Standalone) The minimum dimensions are approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height, with conventional dimensions of 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height. These products are mainly designed with a modular approach, allowing additional systems such as sewage disposal and water supply to be stacked according to needs, supporting standalone use or combination into multi-toilet units. They are commonly found in remote areas, temporary construction projects, or emergency rescue scenarios, with advantages including high flexibility, adaptability to complex terrains, and the ability to operate off-grid through solar power or septic tank treatment.
Customization Services If the existing specifications do not meet specific needs, local suppliers in Yangjiang (such as Jinhua Xin'an Steel Structure Engineering Co., Ltd.) can be contacted for customization. Customization options may include size adjustments, material upgrades (such as stainless steel shells, non-slip floors), and functional expansions (intelligent sensor flushing, air purification systems), but it should be noted that the customization cycle and cost may be higher than those of standard products.
