Quay lại blog
Bài viết
Xinfeng Cement Prefabricated House
Quản trị 18 tháng 9, 2026
"Xinfeng Cement Prefabricated House" (taking "Three Cows Cement House" as an example) is a modular building using reinforced concrete structures. It features fast construction speed and controllable quality, but its seismic performance is relatively weaker compared to cast-in-place houses, making it suitable for non-seismic zones and low-rise buildings.

Construction Process and Structural Features
- Modular Prefabrication: The main body of the house is composed of reinforced concrete modules, which are produced through a standardized production line in the factory, including processes such as steel bar binding, mold assembly, and concrete pouring, all carried out mechanically. The production cycle for a single module is only 7 days, with an error margin controlled within 2 millimeters, ensuring dimensional accuracy and quality stability.
- Structural Strength: It adopts a full-frame shear wall structure, using C35 concrete and Φ14 threaded steel bars. The reinforcement ratio of a single module reaches 1.2%, with a wall thickness of 200mm and a compressive strength of 30MPa, meeting the requirements of conventional building loads.
- Connection Technology: Modules are connected using prestressed bolts (with a tensile strength of 25 tons) combined with traditional Chinese timber-framed building mortise-and-tenon joints. The joints are filled with high-strength mortar to ensure overall stability. However, the connection points are critical technical challenges, and improper assembly may affect building functionality.
Performance and Applicability
- Construction Efficiency: The main body of a 200-square-meter house can be erected in as little as 4 hours, and a 100-square-meter house can be ready for occupancy in just 5 days from an empty lot, significantly shortening the construction period.
- Durability: The modules themselves have no durability issues, with a quality guarantee period of 70 years, but the connection points require regular maintenance.
- Seismic Performance: Compared to cast-in-place houses, modular prefabricated buildings have weaker seismic performance and are only suitable for non-seismic zones, with a maximum height of 5 floors. Exceeding this height makes it difficult to meet seismic design requirements.
Application Scenarios and Cases
- Project Types: Primarily used for residential construction, it can also be applied to low-rise buildings such as dormitories and office buildings.
- Construction Case: In Qixian County, Henan Province, a 200-square-meter three-story villa was successfully erected using a 50-ton crane and an intelligent positioning system, with the main body installed in just 4 hours.
- Additional Features: The walls are embedded with EPS insulation layers, and the roof is pre-installed with photovoltaic panel interfaces to support energy-saving renovations.




