How to Flush a Movable Toilet in Xiamen

The flushing methods for movable toilets in Xiamen mainly include manual flushing, automatic sensor flushing, and waterless or water-saving flushing. Here are the specific operations and characteristics:

1. Manual Flushing

Manual flushing is the most common type in Xiamen's movable toilets, triggered by physical operations. It can be divided into the following two types:

1. Foot-Pedal Flushing: Users step on the pedal with their feet, opening the drain valve through mechanical lever principles to complete the flushing. This design avoids hand contact, ensuring higher hygiene levels. Each flush uses approximately 3-6 liters of water, suitable for ordinary movable toilets.
2. Button Flushing: Press the button on the water tank (some allow adjusting the flush volume), and the water tank automatically releases water. The small flush mode uses about 3 liters per flush, while the large flush mode uses about 6 liters per flush. Users can choose according to their needs, commonly found in higher-end movable toilets.

Precautions: If there is residue after flushing, it may be due to insufficient water tank capacity or clogged pipes, requiring maintenance personnel for inspection and repair.

2. Automatic Sensor Flushing

These toilets automatically flush after detecting the user's departure through infrared sensors, without manual operation, commonly found in high-end or high-traffic movable public toilets. Their advantages include reducing contact contamination, enhancing the user experience, and significant water-saving effects, with each flush using approximately 2-5 liters of water.

Suitable Scenarios: Scenic spots, commercial areas, and other places with high hygiene and convenience requirements.

3. Waterless or Water-Saving Flushing

In response to water scarcity or environmental protection needs, some movable toilets in Xiamen adopt the following technologies:

1. Foam Sealing Flushing: Generate foam through foaming agents to cover excrement, isolating odors and preventing dirt from adhering, requiring only a small amount of water (about 0.1 liters per flush) to rinse the foaming device. These toilets do not require traditional flushing systems but need regular replenishment of foaming liquid.
2. Vacuum Suction Flushing: Use negative pressure to quickly suck excrement into the fecal storage tank, consuming only 0.5-1 liters of water per flush, similar to the principle of airplane toilets. Their advantages include water conservation and high sewage discharge efficiency, but the equipment cost is relatively high, commonly found in high-end movable toilets.

Special Tips: Some movable toilets are labeled with a "dual-flush mode" (small flush 3 liters, large flush 6 liters). Users can choose the flush volume according to the type of excrement to further save water.

Summary: The flushing methods for movable toilets in Xiamen are diverse, and users can choose the corresponding operation based on the toilet type (such as ordinary, high-end, or water-saving). If encountering malfunctions (such as weak flushing or excessive residue), it is recommended to first check the water tank level or pipe patency and promptly contact the maintenance party for handling.