Installation Method for Toilet Mobile Stools

The installation methods for different models of toilet mobile stools vary. Here are the installation steps for common models:

Installation Method for Crossbar Squat Toilet Stools

1. Unpack and Check Components: After opening the package, ensure the completeness of the components, including one stool surface and one crossbar base. If any components are missing or damaged, contact the merchant for replacement.
2. Install Stool Legs: Place the stool surface with the triangle facing upwards to ensure stability. Install stool leg number 2 at the bottom right corner of the stool surface and stool leg number 3 at the top left corner, forming a diagonal support structure. Pay attention to the corresponding numbers to avoid misalignment and instability.
3. Fix the Crossbar: Insert the crossbar into the corresponding slots on both sides of the stool surface, ensuring a perfect fit between the slots and the crossbar. After installation, gently shake the crossbar to check its firmness and prevent it from coming loose during use.

Installation Method for HB003 Commode Chair

1. Unfold the Main Frame and Fix the Crossbar: After taking out all components, first unfold the main frame to its fully extended state. Align the middle crossbar with the fixing holes on both sides of the main frame and press it in place with the buckles. The buckles must fit snugly against the sides of the main frame. Apply even pressure to ensure all four buckles are properly installed and avoid local looseness.
2. Install the Toilet Seat with Hole: Align the buckles on the toilet seat with the slots on the rear crossbar bracket and press down until the buckles are fully embedded. After installation, check if the seat is level to prevent tilting during use.
3. Install the Lid: Align the buckles on the lid with the fixing positions on the crossbar and press them in place in the same manner. The lid must be parallel to the seat and open and close smoothly without jamming.
4. Place the Commode Bucket and Final Adjustment: Open the lid and seat, place the commode bucket inside, and then close them. Ensure the commode bucket fits snugly against the commode chair to prevent shifting during use. Finally, check if all buckles are firm and gently shake the entire structure to test its stability.

Precautions:

• Before installation, carefully read the instruction manual to confirm that the component list matches the model.
• Avoid using excessive force during installation to prevent damage or deformation of components.
• After installation, perform functional tests, including a load-bearing test (recommended to be conducted by an adult with gentle pressure) and an opening and closing test to ensure safety during use.
• If you encounter issues such as buckles that cannot be fixed or mismatched components during installation, stop the installation immediately and contact after-sales service for assistance.