How to Install a Toilet Mobile Stool

The installation method for different models of toilet mobile stools (commode chairs) varies depending on the specific model. Here are the installation steps for common models:

1. YC713 Commode Chair

• Main Frame Expansion: Open the packaging, take out the product and accessories, expand the main frame, and fasten the parking buckles on both sides to ensure structural stability.
• Seat Plate Installation: Align the seat plate buckles with the main frame crossbar and gently press to complete the installation.
• Footrest Support Tube: Insert the support tube into the footrest. When you hear the ball click, it means it is securely in place.
• Commode Bucket Installation: Finally, place the commode bucket in the designated position for use.

2. YC7902S Commode Chair

• Leg Tube Installation: Flip the main frame over, align the four leg tubes with the holes, and secure them with C-shaped buckles, ensuring all holes are aligned.
• Backrest Installation: Insert the backrest into the main frame holes and tighten the knob screws to secure it.
• Armrests and Footrests: Lower the armrests on both sides, insert the footrests from the side into the main frame, and then rotate them to the front. Repeat the operation on the other side, and finally lower the footrests.
• Commode Bucket and Height Adjustment: Install the commode bucket at the rear end; when adjusting the height of the leg tubes, first pull out the C-shaped buckles, realign them with the new holes, and reinsert them to secure them. At the same time, you can loosen the knob screws and nuts for fine adjustments.

3. KJ6206PH Commode Chair

• Main Frame Fixation: After expanding the main frame, pull down the locks on both sides to lock the structure.
• Commode Plate Installation: Align the buckles and install the commode plate onto the main frame, ensuring a tight connection.
• Commode Bucket and Height Adjustment: After placing the commode bucket, press the ball on the leg tube and adjust the height to the desired position according to your needs.

4. ZP201SJ Commode Chair

• Main Frame Assembly: When expanding the main frame, ensure that the left and right side tubes are aligned with the holes. Insert the screws, then sequentially place the washers and nuts, and tighten them with an L-shaped wrench and a solid wrench. Repeat the operation on the other side.
• Fixed Seat Installation: Insert the fixed seat into the main frame and tighten the black rotating nuts on both sides.
• Commode Plate and Seat Plate Installation: First, install the commode plate, then the seat plate, both of which need to be aligned with the first crossbar.

5. Crossbar Squat Toilet Stool

• Accessory Verification: Open the package and check that all accessories are present.
• Stool Surface and Legs: Place the stool surface with the triangle facing up. Install the stool leg numbered 2 in the bottom right corner and the stool leg numbered 3 in the top left corner.
• Crossbar Fixation: Insert the crossbar into the corresponding slots to ensure there is no looseness.

Precautions:

• Before installation, carefully read the instructions to confirm that all accessories are present.
• When adjusting the height or angle, make sure all buckles and screws are securely fastened to prevent looseness during use.
• If you encounter issues such as the ball not clicking or holes not aligning, recheck the installation steps and do not force assembly.