Tibet Mobile Toilet Specifications

The specifications of mobile toilets in Tibet vary depending on the type, with common types and size ranges as follows:

1. Single-compartment mobile restroom
Suitable for construction sites, small events, and other scenarios. The minimum size of the basic single-person unit is approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height, while the regular size is 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height. This type of restroom has a compact space that can meet the basic needs of a single person. It is usually equipped with a squat toilet or a sit toilet, a simple hand-washing sink, and other facilities.

2. Double-compartment mobile restroom
Mainly used in large events, tourist attractions, and other scenarios that require a higher capacity. The regular size of the basic double-person unit is 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height. Its length and width are larger than those of the single-compartment restroom, allowing it to accommodate two people simultaneously. The internal facilities are similar to those of the single-compartment restroom, but the space layout pays more attention to分流设计 (diversion design, here it means separating the flow of people to avoid conflicts in use).

3. Multi-functional mobile restroom
Suitable for high-end events, long-term fixed locations, etc. The size range is 3.0 - 4.5 meters in length, 2.0 - 2.5 meters in width, and 2.5 - 3.0 meters in height. This type of restroom has more comprehensive functions. In addition to basic sanitary facilities, it may be equipped with a management room, a tool storage area, or accessibility aids. The space design focuses more on comfort and practicality.

4. Mobile public restrooms for special scenarios

• Accessible public restroom: It needs to meet the requirements for wheelchair passage, with a minimum length of 2 meters, a width of 1.5 meters, and a height of 2.4 meters. Inside, there should be a wheelchair turning space of at least 1.5 meters × 1.5 meters, and it should be equipped with handrails, low-level hand-washing sinks, and other accessible facilities.
• Mother-and-baby/family public restroom: The size is approximately 2.2 meters in length, 1.8 meters in width, and 2.4 meters in height. It is usually equipped with a baby changing table, children's seats, etc., to facilitate family use.
• Temporary public restroom for scenic spots/large events: It has a multi-unit (4 - 6 toilet stalls) structure, with a length of about 5 - 8 meters and a width of 2 meters. The height information is not fully mentioned, but it needs to ensure good ventilation and lighting effects, making it suitable for short-term high-traffic use scenarios.

In addition, the interior size of the water-saving mobile public restroom is 1.1 meters × 1.6 meters. Through optimized water resource utilization design, it reduces water consumption and is suitable for areas with scarce water resources or scenarios with high environmental protection requirements.