Quay lại blog
Bài viết
Self-made Concrete Prefabricated Small House
Quản trị 18 tháng 9, 2026
Self-made concrete prefabricated small houses can be constructed either by hand or by referencing industrial prefabrication methods. Here are the specific approaches:

I. Handcrafted Mini Cement House (Pure Handmade Prefabrication)
- Foundation Pouring: Dig a foundation pit at the selected location, thoroughly mix cement and sand in proportion, pour the mixture into the pit, and level and compact it with a small shovel to form the house's foundation layer. Ensure the materials are mixed evenly to avoid local weakness in strength.
- Column Construction: Place molds (such as plastic pipes or custom wooden molds) on the foundation layer, pour cement into the molds until they are full. Insert steel bars or wooden sticks into the center of the columns while the cement is still unset to enhance structural stability. After the cement has fully set, remove the molds to form independent columns.
- Roof Construction: Build a roof frame using wooden boards or lightweight materials, supported and fixed by the columns. The frame should reserve space for pouring to ensure tight connection between the subsequent floor slab and the columns.
- Floor Slab Pouring: Pour cement again on top of the roof frame, use a scraper to level the surface, and form a flat floor slab. Continuously vibrate during pouring to expel air bubbles and improve the density of the floor slab.
II. Construction with Small Bricks and Cement (Simplified Prefabrication)
Although detailed steps are not provided, refer to the logic of traditional brick-concrete structures:
- Foundation Treatment: Similar to the cement pouring method, complete the foundation layer construction first.
- Wall Masonry: Use small bricks (such as lightweight concrete bricks) and cement mortar to lay the walls layer by layer, reserving openings for doors and windows. Ensure the brick joints are full to maintain the integrity of the walls.
- Roof and Floor Slab: Use prefabricated concrete slabs or pour on-site, similar to the first method, but pay attention to the connection strength between the brick walls and the roof.
III. Reference to Industrial Prefabrication Methods (Non-pure Handmade)
The popular cement 'prefabricated houses' in rural Henan adopt factory production:
- Modular Design: House components (such as walls and floor slabs) are prefabricated in factories, ensuring dimensional accuracy through standardized molds.
- Rapid Assembly: On-site, only lifting and connecting the components are required, along with a small amount of cast-in-place nodes (such as column-beam connections). The main structure of a villa can be completed in 4 hours, and a high-rise building can be built in 2 days.
- Cost Advantage: The cost per square meter is approximately 300 yuan, lower than traditional brick-concrete structures, with a short construction period, suitable for mass construction in rural areas.
Precautions:
- For handmade prefabrication, strictly control the material ratio (such as cement:sand=1:3) and curing time (usually more than 7 days) to avoid cracking.
- For industrial prefabrication, choose reputable manufacturers to ensure component quality complies with the 'Concrete Structure Design Code' (GB50010).
- Both methods require consideration of the foundation's bearing capacity to avoid structural damage caused by uneven settlement.




