Quay lại blog
Bài viết
Rural Prefabricated Concrete Houses
Quản trị 18 tháng 9, 2026
Rural prefabricated concrete houses are commonly referred to as 'prefab houses' or 'prefabricated reinforced concrete houses'. The core principle involves the pre-fabrication of walls, roofs, beams, columns, and other components in a standardized factory production environment, following precise designs and strict specifications, and then transporting them to the construction site for rapid assembly.

Main Advantages:
- Lower Cost: Taking a 120㎡ self-built rural house as an example, the cost of a traditional brick-and-mortar structure is approximately 180,000 to 220,000 yuan (including labor), while the cost of the main modules of a prefab house is only 120,000 to 150,000 yuan. With interior and exterior decoration, the total cost can be controlled within 200,000 yuan, representing a 30% reduction in overall cost. In rural areas of Henan, prefab houses cost only a little over 300 yuan per square meter and come with a 70-year quality guarantee.
- Higher Efficiency: Traditional self-built houses take 3 to 6 months from bricklaying to completion, whereas prefab houses adopt a 'factory production + on-site hoisting' model. A single 30㎡ module can be prefabricated in the factory in just 7 days. After being transported to the site, three workers can complete the installation of a single module in 4 hours with the help of a crane, and the entire construction of a 100㎡ house takes only 2 days.
- Green and Environmentally Friendly: Factory production is fully controllable, with a 95% recycling rate for off-cuts. There is no dust or sewage discharge at the construction site, and construction waste is only 10% of that from traditional construction methods. Environmentally friendly concrete and water-based paints are used, with formaldehyde emissions ≤ 0.05mg/m³, well below the national standard (0.1mg/m³), enabling 'immediate occupancy upon installation'.
- Structural Stability: C30-C40 grade concrete is used, with built-in Φ8-Φ12 steel reinforcement mesh, providing a compressive strength of 25-30MPa, which is 1.5 times that of traditional brick-and-mortar structures. Modules are connected through prestressed bolts + welded steel plates to form an overall framework, with a wind resistance rating of Level 10 and a seismic fortification intensity of 7 degrees (equivalent to the destructive force of the Wenchuan earthquake).
Disadvantages:
Compared to high-quality self-built houses, the module connections of prefab houses may be prone to cracking and water leakage risks, which need to be improved by optimizing connection techniques or strengthening waterproofing treatments.




