Residential Container House Partition

The installation of partitions in residential container houses usually starts with fixing the corner aluminum, followed by the sequential installation of wall panels, door side panels, door head panels, door frame channel aluminum, and finally fixing the corner aluminum on the other side. The specific installation process and key points are as follows:

Installation Process

• Fixing the corner aluminum: Before installing the partition panels, use blind rivets to fix the corner aluminum for installing the partition panels on one side. This is the basic step for installing the partition, providing a stable frame support for the subsequent installation of wall panels.
• Installing wall panels: First, install the entire wall panel to ensure that it is installed flat and firmly on the corner aluminum frame. Wall panels are the main components of the partition, and their installation quality directly affects the overall performance of the partition.
• Installing door side panels and door head panels: After the wall panels are installed, install the door side panels and door head panels. The installation of these components needs to closely match the wall panels to ensure the normal opening and closing of the door and the overall aesthetics.
• Installing channel aluminum at the door frame: The installation of channel aluminum at the door frame can enhance the stability of the door frame and provide better support for the door installation.
• Fixing the corner aluminum on the other side: Fix the corner aluminum on the other side on the wall and ceiling to complete the overall frame installation of the partition.

Precautions

• Material selection: The materials used for partitions in residential container houses should have good fire resistance, moisture resistance, and sound insulation properties. Common partition materials include color-coated steel plates and rock wool boards, which can meet the usage requirements of residential container houses.
• Installation accuracy: During the installation process, ensure the installation accuracy of each component to ensure the perpendicularity and flatness of the partition. Avoid problems such as partition tilting and excessive gaps, which can affect the usage effect and aesthetics.
• Safe construction: When installing partitions, construction personnel should strictly abide by safety operation procedures and wear appropriate safety protective equipment. Especially when using tools such as blind rivets, pay attention to operation safety to avoid accidents.