How to Flush Renqiu Mobile Toilets

The flushing methods for Renqiu mobile toilets mainly include high-pressure air-water flushing, foam flushing, and specific operation methods for independent mobile toilets, as detailed below:

High-pressure air-water flushing is a relatively common method. It utilizes the synergistic effect of high-pressure water flow and gas to flush the inner walls of the toilet bowl. This flushing method offers significant advantages, including high flushing pressure and a wide flushing range. It can clean the toilet bowl with only one-fifth of the ordinary water volume, greatly conserving water resources. In terms of flushing control, it is jointly managed by an infrared sensor and a computerized intelligent system. When the user finishes using the toilet and leaves, the infrared sensor detects this change and transmits the signal to the computerized intelligent system, which then activates the high-pressure air-water flushing device to ensure a good flushing effect after each use, maintaining the cleanliness and hygiene of the toilet.

Foam flushing is also unique. An automatic foaming machine is installed in the equipment room, which continuously operates to cover the surface of the toilet bowl with a layer of snow-white foam. This process cleverly uses the foam generated by the mixture to replace conventional flushing. The foam not only effectively cleans the toilet bowl but also forms an isolation layer on its surface, blocking the emission of odors, ensuring that the mobile toilet has no noticeable odor during use, creating a relatively comfortable environment for users, and further conserving water resources.

For independent mobile toilets, the flushing operation is relatively independent and involves certain steps. After the user finishes defecating, the first step is to close the toilet lid to prevent splashing of waste during subsequent operations. Next, rotate the air pressure pump to make it pop up, placing it in a ready-to-work state. Then, press the air pressure pump several times, and it will automatically draw water from the tank to flush the waste, using the impact force of the water flow to carry away the excreta in the toilet bowl. After pressing the air pressure pump downwards, rotate it to retract it, completing a full flushing operation. After flushing clean, close the toilet lid again and retract the handle to restore the toilet to its initial clean state, ready for the next use.