Quay lại blog
Bài viết

Renovation of Old Mobile Toilets

Quản trị 20 tháng 9, 2026

The renovation of old mobile toilets should address issues related to space, facilities, and functionality based on specific scenarios and needs. The following are three typical cases for reference:

1. Renovation of ordinary old toilets: Solving problems of limited space and aging facilities For ordinary old toilets with cramped spaces and aging facilities, the core of renovation is to optimize the layout and update basic equipment. For example, if the original toilet position is unreasonable, the old toilet should be removed first, and issues such as broken water pipe angle valves should be addressed. Then, the pipes should be relocated (usually by 40-50 centimeters with a slope to ensure smooth drainage). The floor should be retiled, and a strict waterproof layer should be applied (it is recommended to use flexible waterproof paint applied 2-3 times with a thickness of no less than 1.5 millimeters) to prevent leakage. The walls can be decorated with moisture-proof tiles or waterproof paint to enhance durability. If space permits, storage cabinets or hooks can be added to improve practicality.

2. Renovation of rural mobile toilets: Focusing on convenience and functionality In rural settings, the renovation of mobile toilets should consider both installation efficiency and user experience. Taking the Baisha case in Yichuan County as an example, a modular design with overall insulation and rain protection is adopted, eliminating the need for masonry construction and allowing for same-day installation and use. The interior is equipped with basic facilities such as a toilet (or squat toilet), a small sink, a paper basket, and louvered windows to meet basic needs. If conditions permit, it can be upgraded to an ecological toilet, using microbial degradation technology to treat feces and reduce water consumption; or solar panels can be added to provide lighting. In addition, good ventilation (such as installing an exhaust fan) should be ensured to prevent odor accumulation.

3. Upgrading of old public toilets: Enhancing comfort and intelligence levels The renovation of old public toilets should focus on user experience and technological applications. Taking the public toilet in Tianqiao Street, Xicheng District, Beijing as an example, after renovation, it was upgraded from a Class III to a Class II public toilet, with the addition of 7 unisex squat toilet stalls and 3 independent sit-down toilet stalls to ensure privacy. It is equipped with barrier-free facilities (such as handrails and ramps) to facilitate use by disabled individuals. Warm/cool/fresh air systems are introduced to regulate indoor temperature and humidity; intelligent robots are used for toilet seat disinfection and floor cleaning, reducing labor maintenance costs. In addition, emergency call buttons and anti-fall radars are installed to enhance safety. During renovation, attention should be paid to electrical circuit renovation (such as adding an independent distribution box) to ensure electrical safety.

General renovation suggestions:

  • Preliminary assessment: Measure the space dimensions, check the aging conditions of pipes and electrical circuits, and clarify renovation needs.
  • Material selection: Prioritize the use of waterproof, moisture-proof, and easy-to-clean materials (such as PVC panels and stainless steel fittings).
  • Compliance: Ensure that the renovation complies with local building codes (such as drainage slopes and ventilation standards).
  • Budget control: Carry out the renovation in stages according to needs, prioritizing the resolution of core issues (such as water leakage and odor).