Qingxu County Mobile Toilet Installation

The installation of mobile toilets in Qingxu County requires selecting an appropriate plan based on the type and following standardized procedures to ensure safety and proper functionality.

I. General Installation Steps (Applicable to common types such as flush-type and packing-type)

1. Site Selection Requirements
   Choose a flat and solid ground, avoiding low-lying areas prone to water accumulation or slopes to prevent toilet tilting due to unstable foundations. For flush-type toilets, ensure the site is close to a septic tank or sewage discharge system for easy subsequent pipe connection.

2. Fixing Method
   Use anchor bolts to fix the toilet body to the ground, enhancing wind resistance; if the ground cannot be drilled (e.g., asphalt pavement), use heavy objects (such as concrete blocks) to ballast the bottom and prevent tipping. After fixing, check the levelness to avoid affecting use due to tilting.

3. Drainage System Connection
   For flush-type toilets, connect the drainage pipe to the septic tank or municipal sewage network to ensure smooth sewage discharge. The pipe slope should comply with regulations (usually not less than 2%) to avoid blockage or odor. For independent septic tanks, reserve a cleaning port and perform regular maintenance.

4. Ventilation and Lighting
   Install an exhaust fan on the toilet roof or side wall, or achieve natural ventilation through windows to reduce odor accumulation. If a closed design is adopted, ensure the exhaust fan has sufficient power (it is recommended that the air exchange rate be not less than 60 cubic meters per hour).

5. Signage and Instructions
   Post usage instructions (such as flushing methods and garbage disposal requirements) and safety warnings (such as slip-resistant tips and no-smoking signs) in prominent positions outside the toilet to facilitate proper use by users.

II. Special Requirements for Foam-Type Mobile Toilets

If a foam-type toilet is selected, pay extra attention to the following:

• Ground Bearing Capacity: Confirm that the ground bearing capacity is ≥2 tons per square meter to avoid foundation subsidence due to equipment vibration during operation.
• Power Supply Connection: Provide a stable 220V power supply and install a leakage protection device to ensure the normal operation of the foam generator and control system.
• Anti-Freezing Measures: In northern regions, insulate the water tank and pipes (e.g., wrap with rubber-plastic cotton) to prevent freezing and cracking in winter.
• Sewage Discharge Channel: Reserve a sewage discharge pipe with a diameter of not less than 100 millimeters, connect it to the septic tank or sewage well, and ensure the pipe is free of bends and blockages.

III. Professional Service Recommendation

Jinhua Xin'an Steel Structure Engineering Co., Ltd. can provide customized design, production, sales, and installation services for mobile toilets in Qingxu, covering site evaluation, foundation construction, equipment commissioning, and post-installation maintenance. The installation process complies with national standards (such as the "Urban Public Toilet Design Standard" CJJ14-2016). Users can consult for specific plans through official channels.