Ningxia Mobile Toilet Installation

The installation of mobile toilets in Ningxia should follow a combined model of factory prefabrication and on-site installation, ensuring rapid deployment and quality compliance through standardized processes. The specific steps are as follows:

I. Construction Model and Preliminary Preparations

Mobile toilets adopt a factory prefabrication + on-site installation model, with the overall structure supporting integral hoisting and relocation to meet rapid deployment needs. Two core preparations must be completed before installation:

1. Site Preparation: The site must be leveled and compacted using a 20t road roller, with a bearing capacity of ≥150kPa and a surface flatness error of ≤±30mm. Pour a 100mm-thick C20 concrete cushion and pre-embed eight M16 anchor bolts at the designed positions (exposed length of 200mm, deviation ≤10mm) to ensure structural stability.
2. Technical Preparation: Organize the construction team for drawing review and prepare a specialized construction plan. Train welders in low-temperature welding processes and ensure they pass the assessment before starting work to avoid installation defects caused by insufficient technical skills.

II. Key Steps in the Installation Process

1. Fixed Installation by Professional Teams: Experienced teams will carry out on-site construction, strictly following standard procedures to ensure tight衔接 between all steps.
2. Modular Hoisting and Positioning: Use a total station for precise positioning, with an error control of ≤5mm, to avoid affecting usability or structural safety due to positional deviations.
3. Customization of Ventilation and Sewage Systems: Select ventilation methods (natural ventilation, exhaust fans, or hollow straight exhaust) and sewage disposal methods (water flushing or waterless packaging) based on actual needs to ensure system adaptability and environmental protection.

III. Post-Installation Acceptance and Delivery

1. Multi-functional Testing Before Factory Departure: Complete core functional tests such as power-on and waterproofing at the factory to eliminate potential safety hazards.
2. On-Site Delivery Tests: Customers can focus on testing waterproof performance (e.g., water spray tests), power stability (e.g., circuit connectivity), and material thickness (e.g., walls and floors) to ensure compliance with contract requirements.

IV. Special Requirements for the Installation Environment

1. Three-Proof Standards for Storage Sites: The site must meet windproof, waterproof, and sunproof conditions and be located ≥800m away from residential areas and ≥150m away from surface waters to avoid impacting the surrounding environment.
2. Anti-Static Ground Treatment: Use anti-static rigid epoxy resin material for ground laying to prevent static electricity accumulation and liquid leakage, extending equipment lifespan and ensuring safety.

Through the above process, mobile toilets in Ningxia can achieve efficient, safe, and environmentally friendly installation and use, meeting sanitation needs in temporary or long-term scenarios.