Multi-functional Mobile Toilet Renovation

Multi-functional mobile toilet renovation can be achieved through the renovation of waste items or the selection of professional products. The specific methods are as follows:

I. Renovation of Waste Plastic Buckets

1. Basic Frame Construction: Install four universal wheels at the corners of the wooden board, secure it with wooden strips, and then cut a notch on the front of the board. Wrap the cut sides with wooden strips to form a door frame structure. Embed aluminum sheets to increase the height of the frame and cover the top with the cut neck of the plastic bucket.
2. Internal Structure Treatment: Paint the wooden strips on the inner wall with white cement for beautification. Assemble the door panel and secure it with male-female hinges. Drill small circular holes at the bottom of the bucket to install elbows and floor drains. Connect the intact plastic bucket by drilling holes to link the threaded reducer, and then align the drilled bottom with the reserved opening on the top cover.
3. Pipe System Assembly: Use three-way straight pipes, elbows, etc., to拼接 (assemble) into a '日' (Chinese character meaning 'sun' or used here to describe the shape) shape, with a valve switch installed in the middle. Drill holes to connect the water outlet and install a valve. Secure the clips and place the showerhead. Assemble the toilet tank and seal the edges. Connect the outdoor pipes to the septic tank.
4. Detail Refinement: Install a connecting elbow water pipe and bracket on the door, cut the neck of the water bucket, and wrap the cut surface with a hose to ensure safety and aesthetics during use.

II. Renovation of Water Storage Tanks and Pallets

1. Mobile Base Fabrication: Fix universal wheels at the four corners of the bottom of a plastic pallet and place a recycled water storage tank on it. Use an angle grinder to cut an opening at the top of the tank, stack two opened tanks, and secure them with self-tapping screws.
2. Functional Area Division: Cut a rectangular opening as the doorway, drill a hole in the internal floor to insert an elbow, and seal the water pipe. Align the toilet with the drainage hole, secure it with glue, fix the water pipe to the wall with clips, install a faucet, and block the lower part with a pipe cap, drilling a hole as a drainage outlet.
3. Sanitary Facility Installation: Drill a hole in the pipe cap, apply glass glue, and secure a stainless steel sink. Connect the toilet tank inlet pipe with the shower hose. Install a showerhead, toilet seat, and door panel (connected to the water storage tank frame with hinges), and finally install the door handle.

III. Professional Mobile Toilet Products
For places like scenic spots and parks, finished mobile toilets can be selected, such as those produced by Henan Hemai Industrial Co., Ltd. Their exterior walls are made of metal insulated carved panels, equipped with colored aluminum glass single doors, and can be configured with squat toilets, water tanks, and other facilities internally. Product specifications include 1.3×1.3×2.35 meters, 1.1×1.1×2.35 meters, etc. The materials are color steel plates or metal carved panels, suitable for temperature ranges from -35℃ to 100℃, with a voltage of 220V. They support custom processing to meet personalized needs.