Mobile Toilet with Display

The functions and features of mobile toilets with displays are as follows:

I. Smart Inductive Indicator Lights on the Door Header or Partition Splint of Toilet Cubicles
These mobile toilets are equipped with LED indicator lights to display the real-time usage status of toilet cubicles. They come in two sizes: 120mm×120mm and 350mm×150mm, with a power supply voltage of 12V. They are installed in an embedded manner and can be directly fixed on the door header or partition splint of toilet cubicles. The working principle is single-chip magnetic induction control, and they can be used by connecting to the power supply through linkage with the door lock. When someone is in the toilet cubicle, the magnetic induction switch triggers the display to show red; when it is unoccupied, it shows green and simultaneously displays the Chinese and English words 'Occupied/Unoccupied'. This design provides intuitive feedback on the status through the red and green LED colors and is suitable for single-cubicle or small mobile toilet scenarios.

II. Intelligent Guidance System Status Summary Display on the Exterior Wall of Public Toilets
For multi-cubicle mobile public toilets, some products are equipped with large LED summary displays. The specifications are 770mm (width) × 620mm (height) × 70mm (thickness). The display part uses a combination of 1.5-inch digital tubes and 3.75 dot-matrix unit boards, with a black aluminum alloy frame. Controlled by an infrared remote control, this display can summarize and display the distribution of men's, women's, and third-gender toilet cubicles in real time: red indicates that the corresponding cubicle is occupied, and green indicates that it is unoccupied. This design helps users quickly locate available toilet cubicles through centralized display, improving the efficiency of public toilet usage, especially in public places with high foot traffic.

III. Integrated Display on the Top of Aluminum-Plastic Panel Mobile Toilets
Some mobile toilets made of aluminum-plastic panels adopt an integrated design. The exterior walls are made of fire-resistant and non-deformable aluminum-plastic panels, with an overall size of 5.15 meters (length) × 1.6 meters (width) and an internal net size of 1.2 meters × 1.2 meters. A display is installed on the top, and the bottom is made of thickened anti-slip aluminum plates, with complete internal supporting facilities. These displays are usually linked with the toilet cubicle induction system to display the real-time occupancy status of toilet cubicles and may also integrate other functions (such as usage time statistics and environmental monitoring). The application of aluminum-plastic panel materials not only enhances structural stability but also strengthens the intelligent and modern image of public toilets through the eye-catching design of the top display.