Mobile Toilet Trough Installation Guide

The installation of a mobile toilet trough (mobile toilet) requires selecting the appropriate method based on the model. The installation steps for common basic and universal models are as follows, and attention should be paid to key details to avoid usage issues.

I. Installation Steps for Basic Mobile Toilets

1. Install Anti-Slip Components
   Place silicone anti-slip pads into each of the four corners at the bottom of the toilet, ensuring a tight fit between the pads and the toilet body. The silicone pads enhance stability and prevent sliding during use, especially on smooth surfaces.

2. Assemble Upper and Lower Toilet Bodies
   Align the upper toilet body (including the seat ring and water tank) with the lower toilet body (including the trough and drainage outlet), and press down vertically until a 'click' sound indicates that the clips are securely fastened. After assembly, gently shake the toilet body to check for stability and no looseness.

II. Universal Mobile Toilet Installation (Six-Step Framework)

1. Unpack and Check Accessories
   After opening the package, verify the accessory list (typically including the toilet body, trough, drainage pipe, sealing ring, screws, etc.) to ensure nothing is missing or damaged. If any accessories are missing, contact the merchant for replacements.

2. Refer to the Instruction Manual or Customer Service Guidance
   Due to design differences, the installation steps for universal toilets may vary. Prioritize reading the product instruction manual or obtain video/graphic guidance from customer service to avoid rework caused by incorrect operations.

3. Install the Trough and Drainage Pipe
   Place the trough into the designated position on the lower toilet body, connect the drainage pipe, and tighten the interface. If using a sealing ring, ensure it fully covers the drainage outlet to prevent leakage.

4. Secure the Toilet Body Structure
   Depending on the model, screws may be required to secure the upper and lower toilet bodies or the trough bracket. Use tools with care to avoid scratching the surface of the toilet body.

5. Test Stability and Sealing
   After assembly, gently press down on the seat ring to check for any wobbling in the toilet body; pour a small amount of water into the trough and observe whether the drainage pipe interface leaks.

6. Place in the Intended Location
   Move the toilet to the desired location, ensuring the ground is level. If relocation is necessary, it is recommended to have two people collaborate to avoid component detachment caused by single-handed lifting.

III. Key Considerations

1. Conditions for Using a Toilet Offset Connector
   If adjusting the position of the drainage outlet is necessary, install the offset connector before laying tiles and ensure a drainage slope of ≥2% (i.e., a drop of 2 cm per meter) to prevent drainage issues. The conventional offset range for offset connectors is 2-15 cm; for offsets exceeding 15 cm, a specialized reinforced model should be selected to avoid a significantly increased risk of blockage.

2. Regular Maintenance and Cleaning
   The mobile toilet requires weekly cleaning of the trough and drainage pipe to prevent the accumulation of dirt; the silicone anti-slip pads should be wiped regularly to prevent mold growth and hardening, which can affect their anti-slip effect.

3. Handling Complex Scenarios
   If the installation environment involves sloped land, soft ground, or the need to connect to an external drainage system, it is recommended to contact professional after-sales service to avoid structural damage or sanitation hazards caused by self-modification.