How to Use Mobile Toilet Switches

The usage methods of mobile toilet switches vary depending on the type of toilet. Specific operations should be judged based on the toilet type. Common types and operations are as follows:

Some mobile public toilets: These toilets are usually equipped with door lock status indicators. Before use, observe the door lock display. If it shows a green 'available' status, it means the toilet is currently unoccupied, and you can directly push the door open; some models require scanning a code to unlock. After successful scanning, the door lock status turns green, and you can enter. After entering, make sure to lock the door to prevent others from accidentally entering. The locking method is usually to rotate the lock catch on the inside of the door or press the locking button, depending on the instructions inside the toilet.

Outdoor mobile toilets: Before use, observe the status indicator on the outside of the toilet. A green light indicates that it is unoccupied and can be entered, while a red light or no light indicates that it is occupied or malfunctioning, and you need to wait or find another toilet. After entering, close the door and lock it properly. Some toilet door locks are push-button or rotary types, and ensure that the lock catch is fully inserted into the lock hole. The flushing methods are divided into sensor-based and manual push-button types: if equipped with sensor-based flushing, the sensor will automatically trigger flushing when you stand up and leave, without the need for additional operations; if it is a manual push-button type, press the flush button firmly until the waste is completely flushed away to avoid residue causing odors or blockages.

Smart toilets (may be equipped in some mobile toilets): If the mobile toilet is equipped with a smart toilet, it may have a 'smart lid-opening' function, which means the toilet lid automatically opens when a person approaches. If you need to turn off this function, you can operate it through the remote control: press and hold the 'lid-closing smart lid-opening' button on the remote control for 5 seconds. After hearing a beep from the machine, it means the function has been turned off. After turning it off, the toilet lid will not automatically open when a person passes by. You need to kick the induction area at the bottom of the toilet with your foot or manually lift the lid to use it. This function can avoid accidental triggering or save power. Specific operations should be based on the remote control instructions.

Precautions: When using a mobile toilet, follow the usage instructions or prompts posted inside the toilet to avoid damaging the equipment or affecting others' use due to improper operation. If you encounter a malfunction or are unable to use it normally, contact the on-site management personnel or check the help methods posted outside the toilet.