Mobile Toilet Specifications

Mobile toilet specifications cover multiple aspects including classification and structure, standards, layout, facilities, site selection, leasing, acceptance, and specifications and parameters, as detailed below:

1. Classification and Structural Specifications
Mobile toilets are classified by structure into single-unit (independent) and multi-unit (combined) types; by mobility into hoisting/handling (requiring mechanical assistance) and powered/trailer-mounted (self-propelled or towable) types; and by wastewater treatment into flush, non-flush suction (relying on vacuum or gravity collection), and recirculating flush (using filtered water repeatedly) types. Different types are suitable for different scenarios, such as multi-unit types commonly used in scenic areas and trailer-mounted types often used at temporary construction sites.

2. Non-Flush Sanitary Toilet Standards
Must comply with GB/T18092-2000 'Non-Flush Sanitary Toilets', which specifies requirements for fecal treatment, environmental hygiene, and material corrosion resistance. For example, fecal storage containers must be sealed and leak-proof, with post-treatment harmless indicators meeting standards to ensure no odor diffusion or secondary pollution.

3. Layout Spacing and Quantity Requirements
For large events (e.g., concerts, exhibitions), allocate based on crowd density, with at least one toilet per 50-100 people and spacing ≤100 meters; for small construction sites or markets, allocate one per 200 square meters. Layout should consider site traffic flow to avoid queues and congestion.

4. Facility Configuration and Functional Standards
Interiors require odor control (e.g., sealed toilets, exhaust fans), slip-resistant flooring, and sidewall handrails; exteriors should display signage and have reflective strips at night. Flush toilets should use ≤3 liters per flush, and dry toilets require fecal removal every 24 hours. Premium models include sensor faucets, aroma diffusers, emergency call devices, and some integrate air conditioning or heating systems.

5. Site Selection and Environmental Adaptation Principles
Avoid low-lying flood-prone areas, maintaining ≥5 meters from dining areas and drinking water sources. Construction sites should have hardened ground with surrounding fencing and green isolation; scenic areas should conceal toilets among trees or flowers to minimize visual impact.

6. Leasing Service Process Specifications
Reputable companies must provide full-chain services: site survey → installation and commissioning → deployment of an operations and maintenance team (daily inspections of water/electricity and cleaning/disinfection) → post-event removal and restoration. Contracts must specify emergency plans, such as a 2-hour response time for equipment failures.

7. Compliance and Acceptance Standards
Products must comply with urban environmental sanitation facility standards and provide quality inspection reports; leasing units must have environmental protection filings, with wastewater discharge meeting local standards. During use, assign staff to guide usage and prevent damage; after use, conduct disinfection to prevent odor retention.

8. Basic Specifications and Functional Configurations
Common single/double toilet unit dimensions are approximately 1.2×2.5×2.3 meters, with custom units up to 3×4 meters or larger. The main body uses high-strength fiberglass (compressive strength ≥1500kg), with a waterproof and sun-resistant shell and a lifespan of 8-10 years. Standard models include 200L water and wastewater tanks, while construction site models often use solar power and rainwater collection systems.