Mobile Toilet Layout Specifications and Models

The layout specifications and models of mobile toilets are designed according to usage scenarios and functional requirements. Common types and specifications are as follows:

I. Single-Person Mobile Toilets

1. Regular Model: Dimensions are 110cm in length, 110cm in width, and 230cm in height, suitable for ordinary parks, temporary sites on construction sites, and small event venues. Its compact design meets basic usage needs.
2. Mini Single-Person Model: Dimensions are 100cm in length, 100cm in width, and 220cm in height, optimized for densely populated areas such as small exhibitions and commercial streets, offering higher space utilization.
3. Standard Size Range: Length ranges from 1.2 to 1.5 meters, width from 1.0 to 1.2 meters, and height from 2.2 to 2.5 meters, suitable for construction sites, small events, etc., balancing flexibility and practicality.

II. Double-Person Mobile Toilets

1. Regular Dimensions: Length is 180cm, width is 110cm, and height is 230cm, suitable for team-building venues, outdoor camping areas, etc., accommodating two people simultaneously to improve efficiency.
2. Standard Size Range: Length ranges from 2.4 to 3.0 meters, width from 1.2 to 1.5 meters, and height from 2.2 to 2.5 meters, designed for large events and tourist attractions to meet high foot traffic demands.

III. Accessible Mobile Toilets

Regular dimensions are 180cm in length, 150cm in width, and 240cm in height, with reserved space for wheelchair rotation inside and equipped with accessible facilities (such as handrails and low-positioned sinks), suitable for public places like large parks and scenic area entrances, reflecting humanized design.

IV. Multi-Functional/Luxury Mobile Toilets

Size ranges from 3.0 to 4.5 meters in length, 2.0 to 2.5 meters in width, and 2.5 to 3.0 meters in height, internally equipped with independent restrooms, air conditioning, lighting, etc., suitable for high-end events and long-term fixed venues (such as commercial complexes and exhibition centers), emphasizing comfort and functionality.

V. Construction Site-Specific Mobile Toilets

1. Single-Person Standard Model: Dimensions are approximately 1.2 meters × 0.8 meters × 2.2 meters, suitable for small construction sites requiring temporary setup, with a simple structure and easy mobility.
2. Double-Person Compartment Model: Dimensions are approximately 1.8 meters × 1.2 meters × 2.4 meters, suitable for medium-sized construction sites, providing space for two people to use simultaneously.
3. Multi-Compartment Luxury Model: Dimensions are 3 meters × 2 meters × 2.5 meters or larger, designed for large construction sites, allowing for multiple independent compartments and a management room to meet long-term usage needs.

Design Considerations: The width of toilet stalls should be no less than 0.9 meters, and the height of sinks is recommended to be between 0.8 and 0.9 meters; materials should be lightweight yet high-strength (such as fiberglass), with a drainage system designed at the bottom and waterproof materials used for walls; compliance with the relevant provisions of the "Urban Public Toilet Design Standard" (CJJ 14-2016) is required.
Precautions: Consider road height and width restrictions during transportation; ensure the ground is level during installation to avoid tilting; regularly maintain the drainage system and ventilation equipment to ensure a good user experience.