Deep Cleaning of Mobile Toilets

For deep cleaning of mobile toilets, you can refer to the eight-step cleaning method for mobile public toilets, as follows:

Step 1: Remove Dust and Cobwebs
Use a broom or specialized dust removal tool to thoroughly clean the top, walls, window screens, and surfaces of lighting fixtures in the mobile toilet, focusing on removing accumulated dust and cobwebs. Pay attention to high areas and ensure no corners are missed, ensuring no visible dust remains.

Step 2: Wipe Down Frequently Touched Surfaces
Use a damp cloth or neutral cleaner to wipe down frequently touched areas such as doors, windows, sinks, partition panels, window sills, walls, and switches. Wipe in an orderly manner to avoid cross-contamination, paying special attention to cleaning details like door handles and faucets.

Step 3: Scrub Urinal Scale
For stubborn scale in squat toilets, sit toilets, and urinals, use a specialized brush along with an acidic cleaner (such as diluted hydrochloric acid) for thorough scrubbing. After scrubbing, rinse thoroughly with water to prevent residual chemicals from corroding the equipment surface.

Step 4: Clear Trash and Debris
Sweep the floor and corners inside and outside the toilet for trash, including paper scraps, cigarette butts, and other waste, while replacing the plastic bags in the trash cans to ensure trash does not remain overnight. Extend cleaning to the surrounding 1-meter area outside to maintain overall cleanliness.

Step 5: Mop the Floor and Dehumidify
Use a mop dipped in neutral cleaner to mop the floor, focusing on treating urine stains, water stains, and other dirt. After mopping, use a dry mop or water absorption equipment to remove residual moisture and prevent slippery floors. If possible, turn on ventilation equipment to accelerate drying.

Step 6: Check Facility Integrity
Check if faucets, sensor flushing devices, coat hooks, lighting fixtures, etc., are functioning properly. If leaks, looseness, or damage are found, mark them immediately and report for repair to avoid affecting subsequent use.

Step 7: Disinfect and Deodorize
Spray chlorine-based disinfectants (such as 84 disinfectant) on frequently touched areas like door and window handles, faucets, and switches at least three times a day, allowing them to act for 30 minutes before wiping with water. Simultaneously, turn on deodorizing equipment or light solid deodorizers to maintain fresh air.

Step 8: Organize Cleaning Tools
After cleaning, wash and dry tools such as mops, brooms, and cloths, and store them分类 (classified) in a dedicated tool room to avoid random placement. The tool room should be kept dry and ventilated to prevent bacterial growth.