Mobile Smart Toilet Function Keys

The function keys of mobile smart toilets (taking smart toilets as an example) are mainly divided into five categories: side knobs, side buttons, wireless remote controls/control panels, sensing functions, and power outage emergency functions. The specific functions are as follows:

1. Side Knob

• Function Switching: Rotate to select functions such as buttock cleaning, feminine care, mobile massage, warm air drying, and energy-saving mode. Switching can be done clockwise or counterclockwise. When confirmed, a 'beep' sound is heard, and the corresponding indicator light turns on.
• Operation Logic: Short press to start the function. Press again briefly during cleaning to pause. Long press for 2 seconds to adjust water flow intensity (supported by some models). High-end models support memory mode, allowing storage of water temperature, seat temperature, and air temperature parameters with three short presses.
• Special Functions: A hidden night lighting indicator ring at the bottom of the knob. Long press for 3 seconds to activate soft light guidance. Some models allow the knob module to be removed and replaced with a CR2032 button cell battery, flashing to indicate low battery.

2. Side Buttons

• Flushing Functions: Large flush (long press the button for after-defecation) and small flush (light touch the button for after-urination).
• Drying Function: Usually provides 3 levels of air temperature, with a drying time of about 1-2 minutes.
• Seat Functions: Light touch to turn on/off seat heating, supporting multi-level temperature adjustment (e.g., 34°C, 38°C, 42°C).
• Cleaning Function: Long press the cleaning button for 3 seconds to start automatic cleaning, with the light flashing as a prompt, and the light stops after completion.

3. Wireless Remote Control/Control Panel

• Core Function Keys: Power/stop key (short press to stop current operation, long press to turn on/off), flip seat/lid key (automatically controls the opening and closing of the toilet lid or seat), buttock wash key (concentrated water jet for buttock cleaning), feminine wash key (gentle water flow for feminine hygiene), and drying key (multi-level air temperature adjustment).
• Automatic Operation Key: After sitting down, press to initiate the automatic process of '1 minute of buttock cleaning + 3 minutes of warm air drying'.

4. Sensing Functions

• Proximity Sensing: Automatically opens the lid or flips the seat when a person approaches.
• Leaving Sensing: Automatically flushes the toilet and closes the lid after a person leaves.
• Foot Sensing Flush: Trigger flushing by extending the foot to the sensing point on the side of the toilet base.

5. Power Outage Emergency Function

• Power Outage Flush Button: Early models had a separate button, but now it is mostly combined with the side knob. During a power outage, long press the knob (>3 seconds) to initiate flushing without electricity.

Precautions: It is recommended to complete nozzle self-cleaning before first use (long press the knob for 5 seconds after powering on). Do not forcibly press the nozzle during cleaning; it will automatically retract when turned off. In case of malfunction, you can restart by cutting off the power or reset it by referring to the manual (usually requires simultaneously pressing the knob and the remote control power key). Specific functions may vary slightly depending on the model, so it is recommended to operate in conjunction with the product manual.