Magnesium Oxide Board Mobile Toilet
The magnesium oxide board mobile toilet is a mobile sanitation facility with fire-resistant and moisture-proof properties, suitable for various damp or high fire-safety-requirement scenarios. The following is an introduction from aspects such as characteristics, applicable scenarios, purchasing suggestions, installation precautions, and related manufacturers:
Fire-resistant and moisture-proof properties: The magnesium oxide board mobile toilet excels in fire resistance and moisture proofing. Its moisture proofing is mainly achieved by compounding a fire-resistant coating or melamine veneer on the surface of the base material, effectively blocking water vapor penetration. In a normal humidity environment (humidity 60%-80%), the board is less likely to deform, blister, or get moldy. For example, after being used in a damp environment (such as a bathroom wall) for 3 months, the magnesium oxide sanding board shows no signs of mold or deformation on its surface, and its moisture content is always controlled below 8%, which is superior to ordinary wooden boards. In terms of fire resistance, the magnesium oxide sanding board has passed the B1-level fire-resistance test. It is not easy to burn when exposed to an open flame and does not release toxic smoke.
Applicable scenarios: It is suitable for normal outdoor or indoor damp environments, such as temporary construction sites and scenic-spot restrooms, and can maintain structural stability to meet daily usage needs. It is also suitable for damp areas like kitchens and bathrooms, as well as places with high fire-safety requirements such as children's rooms and nursing homes.
Purchasing suggestions: Attention should be paid to the moisture content (usually ≤12% as required by national standards) and water absorption rate (the lower the better, it is recommended to be ≤15%) of the board. At the same time, its fire-resistance rating (such as Class A non-combustible material) and mold-resistance rating need to be confirmed. For areas with high humidity, it is recommended to choose products with a high-pressure decorative laminate (HPL) or high-density magnesium oxide board surface, which have better moisture-proof properties.
Installation precautions: During installation, ensure that the edges of the board are sealed and maintain internal ventilation in the toilet. It is recommended to use mold-resistant sealant to treat all joints and install a waterproof underlayment on the floor to further isolate moisture. Avoid long-term direct exposure to rain or standing water environments. Install a rain shelter. Regularly check the edges and joints of the board. If the sealant is found to be aged or detached, repair it in a timely manner. If the mobile toilet is used in coastal or extremely damp areas, it is recommended to consult the manufacturer about whether they offer customized options for enhanced moisture-proof treatment. When installing the magnesium oxide sanding board, a 2mm expansion joint should be reserved at the edges to prevent cracking due to thermal expansion and contraction.
Related manufacturers: Xiamen Baohui Industry and Trade Co., Ltd. mainly produces mobile toilets and has related products made of Fujian hollow magnesium oxide boards, such as factory interior fire-resistant and heat-insulating color-steel magnesium oxide sandwich panel ceiling composite purification boards.
