How to Flush Mobile Toilets in Luoyang

The flushing methods of mobile toilets in Luoyang vary depending on the type, as detailed below:

Regular water-flushing mobile toilets, such as standard models and those with double toilet stalls, are typically equipped with standard flushing systems. The flushing control is often achieved through the collaboration of infrared sensors and computer intelligent systems, similar in principle to high-pressure air-water flushing. This system uses high-pressure water flow and gas to flush the inner walls of the toilet bowl, with strong flushing pressure and a wide range, achieving a cleaning effect with only one-fifth of the normal water volume. This design not only ensures effective flushing but also significantly reduces water consumption, making it suitable for places with high hygiene requirements and stable water supply conditions.

Environmentally friendly (water-saving) mobile toilets employ vacuum collection or low-flow flushing systems, using only one-third of the water volume of traditional toilets. The vacuum collection system quickly sucks in waste into storage containers through negative pressure, reducing the need for flushing; the low-flow flushing system optimizes water flow design to reduce the amount of water used per flush while maintaining cleanliness. These toilets are suitable for scenarios with limited water resources or high water-saving requirements, such as outdoor events and temporary construction sites.

Foam-flushing mobile toilets generate foam through an automatic foaming machine in the equipment room, covering the surface of the toilet bowl. The foam layer produced by the foam mixture can replace conventional flushing, effectively cleaning the toilet bowl while blocking odor emission. This technology further conserves water by reducing direct water use, and the lubricating effect of the foam reduces waste adhesion, improving cleaning efficiency.

Waterless-flushing mobile toilets are divided into two types: dry-packing and foam-sealing. The dry-packing waterless-flushing device uses biodegradable plastic bags to collect waste, automatically replacing them with new bags after each use, requiring no flushing throughout the process, suitable for extreme environments without water supply. The foam-sealing type uses compressed air to deliver foam to a foam activator, covering the inner side of the toilet bowl to form a seal, eliminating odors and maximizing water conservation, commonly found in public places with strict environmental requirements.