Linxia Square Mobile Toilet Installation
The installation of mobile toilets in Linxia Square follows a modular design process, with the following specific steps:
Positioning and Chassis Installation Before installation, determine the location according to the site plan to ensure a flat and solid ground. Use a forklift or manual labor to place the prefabricated steel chassis (including the sewage pipe connection flange) steadily. Adjust the chassis height (15-40 cm) to adapt to terrain variations and use a level to adjust it to a horizontal state. The modular design of the chassis facilitates quick positioning and provides a stable foundation for subsequent installations.
Frame and Wall Panel Assembly Install the columns, horizontal support beams, and floor frame sequentially. All connection points are fixed with galvanized bolts to ensure structural stability. The wall panels are made of aluminum alloy composite panels or fiberglass sheets, which are inserted into the frame through slots. The edges are equipped with waterproof sealing strips to prevent leakage. This installation step takes about 1-2 hours. The modular design simplifies the assembly process and reduces reliance on professional skills.
Roof and Pipe Connection The roof adopts a single-slope design. The ventilation pipes are connected to the reserved holes in the wall panels through hoses and secured with stainless steel clamps to ensure airtightness. The roof is also equipped with a passive wind cap that utilizes natural wind pressure to assist ventilation and reduce energy consumption. Pipe connections must be carried out strictly according to standardized interfaces to avoid air leakage or blockage.
Internal Equipment and System Integration
- Install stainless steel squat toilets, plastic water tanks, and mechanical exhaust devices, and connect them to the sewage system through standardized interfaces.
- Equip with water-saving devices (4.5-liter water tanks, delayed self-closing flush valves) and LED lighting systems (light-sensitive control) to achieve intelligent water and energy conservation.
- For smart toilets, pre-bury power and water supply and drainage pipelines, connect sensors (infrared sensors, gas monitors, water level monitors) and management platforms to achieve remote monitoring and automated management.
Functional Debugging and Acceptance After installation is complete, conduct a comprehensive debugging process to check the flushing system, electrical connections, airtightness, and automated control functions (such as enhanced ventilation and lighting on/off) to ensure compliance with the Mobile Toilet Hygiene Standards (GB/T 21239-2023). After debugging is passed, relevant departments will conduct an acceptance inspection to confirm that all indicators meet the standards before the toilets can be put into use.
Efficiency Advantages: The modular design allows a single person to complete disassembly within 4 hours. During transportation, the component volume is compressed to 40% of the in-use state, reducing transportation costs by approximately 35%. Smart toilets adapt to the climatic conditions of the Linxia area through hybrid power supply (photovoltaic + municipal power grid) and biological degradation sewage treatment devices, balancing environmental protection and practicality.
