How to Flush Mobile Toilets in Langfang

The flushing methods for mobile toilets in Langfang mainly include high-pressure air-water flushing, foam flushing, water-flushing and waterless-flushing suction types, and foot-pedal flushing. Details are as follows:

High-pressure air-water flushing: This flushing method uses the combined action of high-pressure water flow and gas to flush the inner walls of the toilet bowl. Its advantages lie in its high flushing pressure and wide flushing range. It can clean the toilet bowl with only one-fifth of the ordinary water consumption, greatly saving water resources. In terms of control, it is achieved through the collaboration of an infrared sensor and a computer intelligent system. When the user leaves, the infrared sensor detects this change and sends a signal to the computer intelligent system, which then activates the high-pressure air-water flushing device to ensure timely and effective flushing after each use, maintaining the cleanliness and hygiene of the toilet.

Foam flushing: An automatic foaming machine is installed in the equipment room, which continuously operates to cover the surface of the toilet bowl with a layer of snow-white foam. The uniqueness of this process lies in using the foam generated by the mixture to replace the conventional flushing method. The foam not only cleans the toilet bowl but also forms an isolation layer on its surface, effectively blocking the emission of odors, ensuring that the mobile toilet has no obvious odor during use, and also reducing water consumption, making the mobile toilet more environmentally friendly and clean.

Water-flushing and waterless-flushing suction types: Water-flushing mobile toilets have a water tank inside and a sewage tank at the bottom. During use, the water tank provides water for flushing. When the user presses the flush button or triggers the corresponding flushing device, the water in the water tank flows into the toilet bowl for flushing, flushing the waste into the sewage tank at the bottom. Waterless-flushing mobile toilets, on the other hand, have no flushing device and directly collect the waste into the sewage tank. This type is more suitable for places with extremely scarce water resources or extremely high water-saving requirements.

Foot-pedal flushing: Some simple mobile toilets adopt this flushing method. There is a specific black ball device in the toilet. When the user finishes using the toilet, they only need to step on this black ball, and the squat toilet will automatically flush. This flushing method is simple to operate, requiring no complex circuit or intelligent system control, and is suitable for simple mobile toilet scenarios with low equipment requirements and a pursuit of convenience and practicality.