Jiangbei Container House Design

The design of container houses in Jiangbei needs to comprehensively consider aspects such as space utilization, structural safety, functional zoning, lighting and ventilation, aesthetic appearance, and sustainability. The specific design points are as follows:

Space Layout and Unit Design

• Combination and Stacking: Using 2-3 containers for combination or staggered stacking can expand functional areas such as living rooms, bedrooms, and bathrooms. For example, connecting two containers can create a flat layout with an integrated living and dining area, two bedrooms, and a bathroom with a bathtub, covering an area of about 100 square meters.
• Staggered Design: Stacking containers in a staggered manner can create richer spatial levels. The ground floor can be reserved for a leisure courtyard or passageway area, improving ventilation and lighting conditions.
• Multi-functional Furniture: For small units (e.g., 15 square meters), it is recommended to use foldable beds, foldable tables, and integrated cabinets to enhance space flexibility and meet diverse living needs.

Lighting and Insulation Design

• Lighting Optimization: Install large floor-to-ceiling windows, roof skylights, or glass partitions to enhance indoor brightness and promote integration with nature.
• Insulation Treatment: Inner insulation layers need to be set up on walls and roofs, and triple-glazed windows should be selected to ensure warmth in winter and coolness in summer, with better thermal insulation performance than traditional red brick walls.
• Shading Design: Prevent excessive summer sun exposure and enrich the architectural facade effect through roof eaves or terrace sunshades.

Integration with the Courtyard and External Environment

• Facade Beautification: The exterior facade can be treated with paint spraying, themed spray painting, cladding, or glass curtain walls to break away from the industrial feel and create a villa-like atmosphere.
• Independent Foundation: Containers are elevated on pile foundations to prevent moisture and insects, facilitate site leveling, and improve living comfort.

Sustainability Design

• Environmentally Friendly Materials: Prioritize the use of recyclable and low-carbon building materials to reduce environmental impact.
• Energy-Saving Technologies: Integrate solar photovoltaic panels for power supply and solar water heaters for heating and water supply to reduce energy consumption.
• Rainwater Harvesting: Design a rainwater collection system for greening irrigation or domestic water use to improve resource utilization efficiency.

Post-Maintenance Points

• Rust Prevention and Corrosion Resistance: During the construction phase, grind and paint the cut and welded edges with epoxy primer and topcoat; inspect the welds, corners, and other rust-prone areas annually and repaint them in a timely manner.
• Waterproof Sealing: Regularly replace the sealant around windows and doors and at container joints, and clean roof leaves to prevent water accumulation and corrosion of the steel plate.
• Condensation Prevention: Reduce temperature differences through insulation layer design to avoid internal condensation.