How to Use a Three-in-One Portable Toilet

The usage steps for a three-in-one portable toilet (taking the Mengxiong three-in-one electronic toilet as an example) are as follows:

I. Startup and Function Selection

1. Device Startup: For some products, press the power/start button on the side or top of the toilet. Once the indicator light comes on, the device enters standby mode. If the product supports automatic induction startup, no manual operation is required.
2. Function Mode Selection: Select the function mode via a knob, buttons, or a touch panel. Common functions include:
   • Flush Mode: Divided into buttock flush and female flush, with adjustable water flow intensity (usually 3-5 levels).
   • Drying Mode: Adjustable temperature (30-45℃) and air speed. Keep a distance of 10-15cm between your buttocks and the air outlet.
   • Heating Mode: The seat heating function starts and reaches the preset temperature (35-40℃) in about 30 seconds.
   • Combined Function: Some products support one-touch switching between commonly used function combinations (such as flush + drying).

II. Core Function Operations

1. Toilet Preparation: Take off your pants and sit on the toilet normally to complete excretion.
2. Flush Function:
   • After selecting the corresponding flush mode, adjust the water flow intensity to a comfortable level via buttons or a knob.
   • The flush time is usually automatically controlled by the system (1-2 minutes), or it can be manually stopped in advance.
3. Drying Function:
   • After flushing, it can automatically switch to the drying mode, or you can manually select it.
   • Adjust the temperature and air speed to an appropriate range and keep a proper distance from the air outlet to avoid burns or discomfort.
4. Heating Function:
   • The seat heating function can be turned on independently, suitable for use in winter or low-temperature environments.
   • The preset temperature range is 35-40℃, and it automatically maintains a constant temperature once the set value is reached.

III. Ending and Cleaning

1. Stop Operation:
   • Press the stop/off button to end use, or wait for the device to automatically power off after 10 minutes of inactivity.
2. Sewage Discharge:
   • Press the flush button on the side of the toilet (distinguish between large/small flush modes) and confirm that the sewage is completely discharged.
3. Daily Cleaning:
   • Use a soft cloth dampened with a neutral detergent to wipe the seat and the body. Avoid using strong acid or alkali detergents.
   • Regularly replace the filter element (if equipped with the product) to prevent scale or impurities from clogging the pipes.
   • Check the capacity of the sewage tank and clean it in a timely manner to avoid overflow.

Precautions:

• Read the instruction manual before the first use to confirm power supply compatibility and function limitations.
• Children or people with mobility issues should use it under supervision to avoid burns or slips caused by misoperation.
• When not in use for a long time, turn off the power and empty the sewage tank to prevent bacterial growth or equipment damage.