Quay lại blog
Bài viết

House Steel: The Complete Buying Guide

Quản trị 16 tháng 11, 2026

When purchasing steel, it is necessary to comprehensively consider factors such as supplier selection, steel types, purchasing and processing, shape specifications, and payment efficiency.

Supplier Selection: Hardware stores and large supermarkets have limited types of steel and high prices, and online stores also have relatively high prices. It is recommended to look for local steel distributors that sell to the public. These suppliers can cater to both the large-volume purchases of industrial users and the scattered needs of household users, making them a more suitable choice.

Steel Type Selection:

  • Hot-Rolled Steel: Usually meets the A36 standard and is suitable for most practical applications. It comes in various shapes, including 20-foot-long solid bars, 21-foot-long pipes, and 24-foot-long square/rectangular tubes.
  • Cold-Rolled Steel: It has high dimensional accuracy and sharp edges and corners, but its length is only 12 feet and it is more costly. Some models with higher carbon content are more difficult to weld, so selection should be based on specific needs and welding capabilities.

Purchasing and Processing Considerations: Most suppliers only sell whole pieces of steel, which can be cut into multiple sections as needed for transportation. This should be clearly stated in the initial order. If high precision is not required, the lowest-cost flame cutting method can be chosen. If precise length cutting is needed, specify the cutting method (such as sawing or flame cutting) and tolerance (e.g., ±1/16 inch, suitable for most projects). Such processing may require several days of preparation time.

Steel Shapes and Specifications:

  • Solid Bars: Include flat bars (e.g., F3x1/4"), square bars (e.g., 3/4" square bar), round bars, etc.
  • Angle Bars: Specifications are indicated by side length and thickness (e.g., L2x2x3/16" represents a 2-inch angle bar with a thickness of 3/16 inch). Some suppliers offer unequal-angle bars (e.g., L3x2x1/4").
  • Beams: Include standard beams (S), wide-flange beams (W), channel beams (C), etc. Specifications are indicated by approximate height (in inches) and weight per foot (e.g., S4x7.7 represents a height of approximately 4 inches and a weight of 7.7 pounds per foot).

Payment and Efficiency: Confirm in advance the payment methods accepted by the supplier, as some distributors do not accept credit cards. Since household users purchase in smaller quantities, it is necessary to make efficient use of the supplier's time to optimize the service experience.