House Prefabricated Image Collection
Currently, we cannot directly provide a 'House Prefabricated Image Collection', but we can offer a detailed introduction to the types, characteristics, and typical cases of prefabricated houses to help understand their structure and design.

Prefabricated houses are constructed by industrially producing building components and assembling them on-site. Their core advantages lie in standardized production, rapid installation, and flexible combination, significantly shortening construction periods and reducing labor costs. Based on their structural forms, prefabricated houses are mainly divided into the following three categories:
Panel Assembly Type
This type uses prefabricated wall panels, floor slabs, roof panels, and other components as the foundation, which are connected on-site using connectors to form a complete building. The walls of such houses typically employ lightweight materials (such as aerated concrete and composite panels), with pre-embedded water and electricity pipelines inside, allowing for direct decoration after installation. For example, some temporary office buildings or school classrooms adopt this structure, with the assembly period for a 70-square-meter house shortened to 1-2 weeks.Box Assembly Type
This type uses independent functional modules (such as bedrooms, bathrooms, and kitchens) as units, with each module completing interior decoration and equipment installation in the factory before being transported to the site and connected using bolts or welding. A typical case is the expandable container house, whose modules are integrated with doors, windows, lighting, and sanitary facilities during factory production. On-site, only assembly and connection of water and electricity are required. The total cost for a fully furnished 70-square-meter house (including foundation construction) is approximately 200,000 RMB, making it suitable for post-disaster reconstruction or tourism resort construction.Frame Assembly Type
This type uses prefabricated concrete or steel structural frames as supports, paired with prefabricated floor slabs, wall panels, and other components. In such houses, the load-bearing structure is separated from the enclosure structure, allowing for more flexible spatial layouts. They are commonly used in multi-story residential or commercial buildings. For example, some prefabricated apartments adopt steel structural frames combined with lightweight partition panels, improving construction efficiency by more than 30% compared to traditional concrete buildings.
The design of prefabricated houses must consider structural safety, transportation convenience, and functional integrity. For example, the module dimensions of expandable container houses must comply with highway transportation height restrictions while reducing transportation volume through folding designs; wall panels of panel assembly-type houses must have pre-reserved pipeline slots to avoid on-site chiseling that could damage the structure. With technological advancements, prefabricated houses are gradually evolving towards intelligence and greenness, such as integrating solar panels and smart security systems, further expanding their application scenarios.




