Honghe Mobile Public Toilet Specifications

The specifications of Honghe mobile public toilets can be customized according to customer requirements. Common standards vary depending on the type, function, and usage scenario, as detailed below:

I. Basic Mobile Public Toilets

1. Single-Occupant (Standalone)
   The minimum dimensions are approximately 1.2m (length) × 1.0m (width) × 2.2m (height), suitable for temporary locations with limited space. The standard dimensions are approximately 1.5m (length) × 1.2m (width) × 2.3m (height), meeting the needs of single-person independent use. Internally, they are typically equipped with a squat toilet or sit-down toilet, a simple handwashing station, and a ventilation system.
2. Double-Occupant (Two Toilets)
   The standard dimensions are approximately 2.5m (length) × 1.5m (width) × 2.3m (height), featuring a dual-compartment design with a shared handwashing station. This design is suitable for areas with high foot traffic, such as scenic spot entrances or temporary event venues. The structure optimizes space utilization while ensuring that the two toilet compartments can be used independently without interference.

II. Functional Mobile Public Toilets

1. Barrier-Free Toilets
   These must meet the requirements of the Barrier-Free Design Code, with minimum dimensions of at least 2.0m (length) × 1.5m (width) × 2.4m (height). Internally, they must provide a wheelchair turning space of at least 1.5m × 1.5m to ensure 360-degree maneuverability. Supporting facilities include handrails (height 0.85-0.9m), non-slip flooring, and entrance ramps (slope ≤ 1:12), catering to special groups such as the elderly and disabled.
2. Maternity/Family Toilets
   The standard dimensions are approximately 2.2m (length) × 1.8m (height) (information from the original text is incomplete; this is a reasonable estimate). Internally, they must be equipped with an infant changing table, a child safety seat, and an independent handwashing basin. The spatial layout should accommodate both adult and child usage needs, typically incorporating soft lighting and anti-collision design to enhance safety and comfort.

III. Structural and Material Standards
The overall structure of Honghe mobile toilets uses a steel frame with 14# hot-dip galvanized channel steel combined with 80 rectangular tube structures, with wall thicknesses exceeding 4mm to ensure wind resistance and load-bearing capacity. All component welds comply with national standards, and the surfaces undergo anti-corrosion treatment (such as spraying anti-rust paint or hot-dip galvanizing) to withstand harsh outdoor conditions like humidity and temperature fluctuations, thereby extending service life.