Heyuan Single Mobile Toilet Installation

The installation process of single mobile toilets in Heyuan generally follows the core steps of 'positioning - assembly - connection - debugging', as detailed below:

1. Positioning

Determine the installation location based on site planning and ground conditions, meeting two core requirements:

1. Ground firmness: Prefer hardened ground (such as concrete). For soil or soft ground, hardening treatment or steel plate laying should be carried out in advance to prevent toilet tilting or damage due to foundation settlement.
2. Drainage conditions: If connection to municipal sewage pipes or a dedicated septic tank is required, plan the drainage path in advance to ensure a reasonable slope; waterless or biodegradable toilets can simplify this step.

2. Assembly

Choose the assembly method based on the toilet type:

1. Split-type mobile toilets:
   • Chassis installation: Use a forklift or manual labor to place the prefabricated steel structure chassis steadily and adjust it to a level state using a level gauge.
   • Wall installation: Insert the sandwich panel wallboards into the chassis slots one by one and secure them with bolts or clips; after installing the roof panel, perform sealing treatment (such as caulking or rubber strips) to prevent rainwater leakage.
   • Time reference: Wall installation usually takes 1-2 hours. Integrated box-type toilets are quicker to assemble on-site due to pre-installed internal structures in the factory.
2. Integrated mobile toilets:
   • Directly hoist to the predetermined position without on-site wall assembly, only requiring minor level adjustments before proceeding to the next step.

3. Connection

1. Equipment installation: Secure internal partitions, toilets, flushing systems (if any), sinks, and lighting and ventilation equipment.
2. Water and electricity connection:
   • Modular interfaces: Adopt quick-connect designs to shorten the connection time of water and electricity pipelines, but must be operated by professionals to ensure safety.
   • Sewage treatment: If connecting to the municipal network, reserve sufficient pipeline length and ensure tightness; biodegradable toilets can skip this step.

4. Functional Inspection and Debugging

1. Flush test: Check the toilet flush pressure and drainage speed to ensure no blockage.
2. Circuit inspection: Test whether lighting, ventilation equipment, and sockets (if any) are working properly.
3. Sealing inspection: Focus on checking for water leakage at the roof, wall panel joints, and pipeline connections.

Influencing Factors and Standard References:

• Installation efficiency: Integrated box-type toilets can be installed in as fast as 2-4 hours, while split-type toilets take 4-6 hours; professional team experience can improve efficiency by more than 30%.
• Standard requirements: Must comply with the 'Mobile Toilet Hygiene Standard' (GB/T 21239-2023) to ensure structural safety, hygiene compliance, and environmental performance.