Handan Mobile Toilet Specifications

The common specifications of mobile toilets in Handan are designed according to usage scenarios and functional requirements, mainly divided into three types: single-stall, double-stall, and multi-functional. The specific dimensions and design points are as follows:

The length of a single-stall mobile toilet is typically 1.2-1.5 meters, with a width of 1.0-1.2 meters and a height of 2.2-2.5 meters. This specification is suitable for construction sites, small events, and other scenarios where space is compact but basic usage needs can be met. When designing, ensure that the width of the toilet stall is no less than 0.9 meters to guarantee sufficient space for users; the height of the sink is recommended to be 0.8-0.9 meters, in line with ergonomic standards. In terms of materials, lightweight high-strength composite materials (such as fiberglass) are often used, which not only reduce the overall weight for easy transportation but also ensure structural stability. A drainage system must be designed at the bottom to prevent water accumulation; waterproof materials should be used on the walls to avoid damage caused by humid environments.

The length of a double-stall mobile toilet is 2.4-3.0 meters, with a width of 1.2-1.5 meters and a height of 2.2-2.5 meters. Its expanded space can accommodate two independent toilet stalls, making it suitable for large events, tourist attractions, and other scenarios with high foot traffic. The design points are similar to those of single-stall toilets, but attention should be paid to the spacing between stalls and the width of the aisles to avoid interference between users. The drainage system should be optimized to a dual-channel design to ensure efficient drainage during simultaneous use; the waterproof materials on the walls need to have higher durability to cope with frequent usage scenarios.

The length of a multi-functional mobile toilet is 3.0-4.5 meters, with a width of 2.0-2.5 meters and a height of 2.5-3.0 meters. This specification is suitable for high-end events and long-term fixed locations. In addition to basic toilet stalls, it can integrate sinks, storage cabinets, and even barrier-free facilities. When designing, focus on the rationality of space zoning, such as separating the toilet stalls from the sink area to enhance the user experience. Material selection should balance lightweight properties with durability. The drainage system at the bottom should be equipped with a filtration device to prevent clogging by debris; the thickness of the waterproof layer on the walls should be increased to adapt to long-term exposure to outdoor environments.

Core Design Principles: All types of mobile toilets must be based on ergonomics to ensure that the dimensions of key facilities such as toilet stalls and sinks meet standards; material selection should balance lightweight properties with structural strength for easy transportation and installation; drainage systems and waterproofing are crucial for ensuring service life and should be optimized according to usage scenarios.