Quay lại blog
Bài viết

Gansu Mobile Toilet Specifications

Quản trị 20 tháng 9, 2026

The specifications of mobile toilets in Gansu vary depending on the type, mainly divided into three categories: mobile toilet vehicles, single-stall mobile toilets, and plastic flush mobile toilets. The specific parameters are as follows:

I. Specifications of Mobile Toilet Vehicles in Gansu

  1. Basic Structure and Vehicle Parameters: The vehicle body is primarily made of steel or aluminum alloy, offering strong corrosion resistance. The vehicle length ranges from 6 to 8 meters, with a width of approximately 2.2 meters and a height not exceeding 3 meters. The chassis is designed according to national load standards, featuring wear-resistant tires, and some models are equipped with hydraulic lifting systems.
  2. Internal Layout and Space Configuration: The toilets are divided into male, female, and accessible stalls, with waterproof and corrosion-resistant partition walls between stalls. The washing area is equipped with faucets, sinks, and mirrors. High-end models feature air purification systems with independent exhaust fans in each area.
  3. Sanitary Facilities and Equipment: The flushing system is designed for water conservation, with water tank capacities ranging from 200 to 500 liters, supporting both automatic and manual flushing. Consumables such as toilet paper and hand soap are provided, and some models are equipped with ultraviolet disinfection lamps.
  4. Water Supply and Drainage Systems: The capacities of the freshwater and wastewater tanks vary by model, ranging from tens to hundreds of liters. The drainage system features efficient piping design, with some models equipped with drainage pumps.
  5. Power and Lighting Configuration: Power is supplied by onboard batteries or external power sources, supporting the operation of flushing equipment, fans, and air purification systems. LED lighting is used inside the vehicle, with some models featuring emergency lighting equipment.
  6. Ventilation and Air Purification: A forced exhaust system combined with exhaust fans is used, with some models designed with fresh air systems to optimize air quality.

II. Specifications of Single-Stall Mobile Toilets The dimensions are 1.1m × 1.1m × 2.3m, made of metal carved panel material. Types include packaged, water-flush direct-discharge, and foam-blocking models. They are suitable for scenic spots, streets, municipal areas, residential communities, and construction sites. The service life is up to 15 years, demonstrating long-term durability.

III. Specifications of Plastic Flush Mobile Toilets The dimensions are 1000mm × 1050mm × 2400mm (length × width × height), with the main body made of high-density polyethylene environmentally friendly material. The fecal storage tank has a capacity of 300 liters, capable of supporting continuous use by 350 people. The hand-washing tank has a capacity of 50 liters, and the flushing tank has a water addition capacity of 95 liters. The interior is equipped with a squat toilet, hand-washing station, 304 stainless steel paper towel holder, clothes and hat hooks, a makeup mirror, a door lock, and a booster pump flushing device. The disposal method supports storage or direct discharge, with direct discharge allowing connection to a septic tank or sewage pipe network.