Water-saving Function of Environmental Protection Mobile Toilets

The water-saving function of environmental protection mobile toilets is mainly achieved through various technologies, as follows:

Waterless Flushing Solution

It can operate without connecting to water supply and drainage pipes, thus avoiding the consumption of a large amount of water resources at the source. This solution is suitable for areas with scarce water resources or where it is difficult to lay water supply and drainage pipes, such as remote wild construction sites and large outdoor event venues. It treats excreta through special methods, such as using biodegradable materials or physical sealing, without the need for water flushing, greatly saving water resources.

Water Flushing Solution

It adopts technologies such as rainwater collection and filtration systems and secondary toilet flushing with hand-washing water. The rainwater collection and filtration system can collect natural precipitation, filter it, and then use it for toilet flushing, making full use of natural resources. Secondary toilet flushing with hand-washing water collects the water after people wash their hands and uses it again for toilet flushing, improving the utilization rate of water resources and reducing the use of fresh water.

Foam Sealing Solution

It is one of the environmental protection technology solutions that reduces water usage through foam sealing. Foam has lubricating and sealing effects. During the use of the toilet, the foam can cover the surface of the excreta, forming a sealing layer to prevent odor from spreading and at the same time reducing the amount of water for flushing. This method not only saves water but also effectively improves the toilet environment.

Automatic Collection of Hand-washing Water and Addition of Special Agents

It achieves a flushing effect of only 0.46 liters per person. This technology collects the water after people wash their hands and adds special agents. These agents can enhance the flushing ability of the water, achieving a good flushing effect with a small amount of water and greatly reducing water consumption.

Recirculating Water Flushing Type

It is equipped with intermittent aerobic and anaerobic fecal sewage treatment devices, adds biological strains, and uses biofilm technology to accelerate decomposition. The treated water can be recycled for flushing. This technology treats fecal sewage to meet the standard for reuse, achieving the recycling of water resources and further improving the water-saving effect.

Intelligent Water-saving Ecological Environmental Protection Toilet

By automatically collecting urine and hand-washing water and adding water-saving special agents, it can achieve a flushing effect of about 0.46 liters per person. It uses an intelligent system to precisely manage and utilize water resources, improving the utilization efficiency of water resources and achieving the goal of water conservation.

Mobile Water Flushing Toilet

It is triggered by a foot pedal or sensor device, with a single flush volume controlled within 1 - 2 liters, saving more than 70% of water resources compared to ordinary toilets. Some high-end models are equipped with rainwater collection and reclaimed water reuse systems. The foot pedal or sensor device can precisely control the flush volume according to the usage situation, avoiding unnecessary waste, while the rainwater collection and reclaimed water reuse systems further expand the sources of water resources and improve water-saving capabilities.