Quay lại blog
Bài viết

Drainage Ditch Inside Container House

Quản trị 17 tháng 9, 2026

The drainage ditch in a container house mainly refers to the open or closed ditches outside for site drainage, while internal drainage is achieved through floor drains and pipes. These two have different functions but work together to ensure the house's moisture resistance and drainage efficiency.

Design and Function of External Drainage Ditches

The external drainage ditch of a container house is a core component of the site drainage system. Its main function is to direct rainwater and surface wastewater away from the house, preventing water accumulation from causing structural moisture damage or foundation settlement. According to the construction method, drainage ditches can be divided into two types: open ditches and closed ditches:

  • Open ditches: These are trenches dug directly on the ground surface, covered with gravel or concrete precast slabs. They are simple to construct and easy to clean and maintain later, suitable for areas with high rainfall or significant terrain undulations.
  • Closed ditches: These are buried underground, with the surface covered with soil or vegetation, not affecting the ground aesthetics. However, regular inspections are required to check for pipe blockages, suitable for sites with high landscape requirements.

The depth and width of the drainage ditch need to be comprehensively determined based on the site's rainfall, terrain slope, and soil permeability. For example, in areas with an annual rainfall exceeding 800 millimeters, it is recommended that the drainage ditch be at least 30 centimeters deep and 20 centimeters wide to ensure drainage capacity. At the same time, the site should maintain a drainage slope of 0.3%-0.5% to allow water to naturally flow towards the drainage ditch and prevent water from backing up into the bottom of the house.

Functions and Requirements of the Internal Drainage System

The internal drainage system of a container house is independent of the external drainage ditch and mainly handles domestic wastewater from areas such as the kitchen and bathroom. Its design needs to meet the following requirements:

  • Floor drains and pipes: The kitchen sink, bathroom floor drains, and toilets need to have dedicated drainage pipes pre-installed, with a pipe slope of not less than 1% to ensure rapid wastewater discharge without residue.
  • Odor prevention measures: It is recommended that the kitchen sink drainage be connected to underground pipes and equipped with a water trap to isolate odors using a water seal. For bathroom floor drains and toilet drainage, products with good odor prevention performance should be selected to avoid odor backflow.
  • Waterproofing treatment: The floor should be coated with waterproof paint, and the corners and areas where pipes pass through the walls should be sealed more tightly to prevent wastewater from penetrating into the container structure.

Synergistic Effect of External and Internal Drainage Systems

The external drainage ditch and the internal drainage system have clear divisions of labor: the former removes accumulated water around the house, while the latter handles indoor wastewater. Together, they form a complete drainage network through reasonable site slopes and pipe connections. For example, if the external drainage ditch is blocked, causing site water accumulation, water may seep into the interior through the gaps at the bottom of the container. If the slope of the internal drainage pipes is insufficient, wastewater may back up into the external drainage ditch, affecting overall drainage efficiency. Therefore, regular inspections and maintenance of both are crucial.