Container House Installation Tools

The installation of container houses primarily involves tools and fasteners such as basic lifting equipment, hex socket bolts, self-tapping screws, round-head drill tail screws, and cross-recessed flat-head燕尾丝 (Note: '燕尾丝' is translated as 'dovetail screws' here for context, but a more precise industry term may exist) screws. The specific installation tools and processes vary depending on the type of container house (such as quick-assembly container houses, foldable container houses, packing-box container houses, etc.) and design differences. Here is a detailed explanation:

Quick-assembly container houses: These adopt a modular plug-in design without the need for complex welding procedures, primarily relying on basic lifting equipment (such as cranes) for assembly. For example, the quick-assembly container houses from Suzhou Zhongnan Steel Structure Co., Ltd. require only 4-6 hours for the installation of a single module. The entire process involves positioning the modules through lifting and connecting them using a plug-in method, requiring only 3 skilled workers to complete. This reduces labor costs by nearly 50% compared to traditional welding methods. The houses come pre-installed with basic interiors such as electrical circuits and doors and windows, allowing for immediate use after installation and further reducing the need for on-site tools.

Foldable container houses: Installation primarily involves lifting and fastening tools. Steps include checking the stability of steel wire ropes, lifting the main frame and unfolding it, placing support rods, pushing open the walls, and securing them with fastening screws. For example, the third-generation product from Tengfei can be installed in just 3 minutes by two operators. During the process, screwdrivers or electric wrenches are used to tighten the screws, and non-professionals are kept away from the installation area to ensure safety.

Packing-box container houses and traditional container panel houses: Installation tools are more detailed and require the coordination of various fasteners. During the base frame installation stage, hex socket bolts are used to connect the corners of the container to the base beams, and the diagonals are adjusted before tightening. π-shaped secondary beams are fixed with self-tapping screws, and the top is reinforced with round-head drill tail screws. The floor is laid using cross-recessed flat-head dovetail screws at intervals of 300-350mm, and PVC floor adhesive and floor adhesive welding tools are used to complete the sealing process. For example, the installation instructions from Boyuan Container Houses explicitly require the use of specifications such as m5.519 self-tapping screws and st4.816 round-head drill tail screws to ensure structural stability.

In addition, some container house frames are made of galvanized thickened materials and are assembled using screws, eliminating the need for welding equipment, further simplifying the installation process and reducing tool complexity.