Container House Installation Pictures

Currently, we cannot directly provide installation pictures of container houses, but we can assist in understanding through textual descriptions of installation steps and design points, with some cases including reference links to design drawings.

Container House Installation Steps

1. Foundation Construction
   This should be carried out on a flat ground or workbench, ensuring that the ground bearing capacity meets the requirements. For example, during the installation of the bottom frame, the bottom corners of the container should be connected to the bottom beams using hexagon socket bolts, which should be fixed but not tightened initially. Tightening should occur only after adjusting the diagonal differences of the bottom frame to be ≤3mm. The floor base plates should be laid along the 6-meter direction, with pre-punched base plates at both ends cut at an angle according to the chalk line. The joints should coincide with the centerline of the π-shaped beams and be fixed with cross-head燕尾丝 (a type of screw, translated as 'dovetail screws' here for understanding, though the exact English term may vary), with nail spacing of 300-350mm.

2. Wall and Roof Assembly
   For foldable container mobile homes, the main frame should be lifted first, then expanded and stabilized with support rods. During wall installation, push open the walls with doors and windows and fix them with fastening screws to ensure structural tightness. The roof can be upgraded to a retractable design, with lifting rods installed at the four corners to enhance ventilation and lighting, and solar panels added on top to solve power supply issues.

3. Functional Module Integration
   The interior space should be divided into functional areas according to needs. For example, the bedroom can use custom-made foldable beds, which can serve as sofas when half-folded; the kitchen can adopt a linear design to save space, paired with open and closed storage; and the bathroom should have rounded corners, with the door completely concealed when closed to enhance aesthetics.

Design Points and Case References

• Drainage and Water Supply: As container houses are made of iron structures, ensure that the ground level is higher than the surrounding area during installation. Dig drainage ditches and cover the top with an 'A'-shaped canopy. Water supply can be solved by connecting to the municipal system or adding water tanks.
• Modular Expansion: Multiple containers can be combined to form large residences, such as a 120-square-meter villa formed by staggered stacking of four 30-square-meter containers, including functional areas such as a living room, kitchen, and patio.
• Design Drawing References: Some cases include links to design drawings, such as those in 'Container House Design Drawings', which showcase design schemes for spaces such as studies, bedrooms, and kitchens, allowing for further understanding of layout details.

For specific pictures, it is recommended to enter keywords (such as 'Container House Installation Diagram' or 'Actual Photos of Container Renovation Cases') into a search engine to obtain visual references.