Zhanjiang Mobile Toilet Specifications

The specifications of mobile toilets in Zhanjiang vary depending on the type and usage scenario, mainly including rental-type, for-sale-type, container-type, and other common specifications, as detailed below:

I. Rental-Type Mobile Toilet Specifications

1. Standard Single-User Stall: Length: 1.2-1.5 meters, Width: 0.8-1 meter, Height: 2.2-2.4 meters, with an internal space of approximately 1-1.5 square meters. It accommodates only one person and is suitable for temporary events or scenarios with low personnel density.
2. Double-Occupancy Partitioned Type: Length: 1.8-2.2 meters, Width: 1.2-1.5 meters, Height: 2.3-2.5 meters, equipped with a sink and storage cabinet. It is suitable for families or multiple people using it simultaneously and is commonly found in scenic spots or large events.
3. Barrier-Free Access Type: Length: 2.5-3 meters, Width: 1.5-1.8 meters, height reduced by 10-15 cm, equipped with ramps and handrails to meet the needs of wheelchair access. It is suitable for public places or service scenarios for special populations.

II. For-Sale-Type Mobile Toilet Specifications

1. Smart Eco-Friendly Type: Dimensions approximately 2.0×1.5×2.4 meters, featuring a water-saving flushing system (single flush water consumption ≤ 2 liters), equipped with a deodorizing fan and solar power supply. It is suitable for long-term fixed use in scenarios requiring energy conservation and environmental protection.
2. Scenic Spot Customized Type: Length: 2.5-3 meters, Width: 1.8-2 meters, with an exterior that incorporates local cultural elements. It can be equipped with a sink, mirror cabinet, and aroma system to enhance the user experience. It is commonly found in tourist attractions or high-end venues.
3. Outdoor Engineering Type: Dimensions 2.2×1.2×2.3 meters, featuring wind and water-resistant design with a service life of 5-8 years. It is suitable for high-intensity use scenarios such as construction sites and music festivals, emphasizing durability and stability.

III. Container Mobile Toilet Specifications (Taking the Potou District Project as an Example)

1. Container Dimensions: 6058mm×2438mm×2896mm (length×width×height), modularly assembled from three standard 40-foot shipping containers for easy transportation and assembly.
2. Wall and Floor: The walls are made of 18mm thick sandwich color steel plates (EPS insulation layer), and the floor has a load-bearing capacity of ≥200kg/square meter, adapting to complex outdoor environments.
3. Supporting Systems: The power supply is 380V three-phase five-wire system, equipped with a 5kW solar power panel; the water supply and drainage system uses a vacuum negative pressure flushing system + a 500L sewage tank; ventilation is achieved through a top axial fan (φ300mm) and 8 sets of natural ventilation windows.

IV. Other Common Specifications

1. Single-User Basic Type: Length: 1.2-1.5 meters, Width: 0.8-1.0 meters, Height: 2.2-2.4 meters, with basic configurations meeting fundamental usage needs.
2. Double-User Basic Type: Length: 1.8-2.2 meters, Width: 1.0-1.2 meters, Height: 2.2-2.4 meters, with slightly more space than the single-user type, suitable for short-term multiple-person use.
3. Barrier-Free Type: Length: 2.0-2.4 meters, Width: 1.2-1.5 meters, Height: 2.2-2.4 meters, optimized for passage space and complying with barrier-free design standards.
4. Luxury Type: Length: 2.5-3.0 meters, Width: 1.5-2.0 meters, Height: 2.4-2.6 meters, with spacious space and high-end configurations, suitable for high-end commercial or public places.