Yuncheng Mobile Toilet Dimensions and Specifications
The dimensions and specifications of mobile toilets in Yuncheng vary depending on the type, with common specifications as follows:
The Single-Person Standard Model is the most basic type of mobile toilet, designed primarily to meet the needs of a single user. The common dimensions are 110 cm in length, 110 cm in width, and 230 cm in height (i.e., 1.11.12.3 meters), with some products having slightly adjusted heights, such as 1.11.12.35 meters. These specifications are suitable for scenarios with limited space but requiring basic toilet functions, such as temporary events and construction sites. Their compact design maximizes the use of available space while ensuring sufficient room for the user.
The Mini Single-Person Model is a smaller version within the single-person category, with dimensions of 100 cm in length, 100 cm in width, and 220 cm in height (i.e., 112.2 meters). This type further reduces the footprint and is suitable for scenarios with extremely high space requirements, such as narrow streets and small exhibitions. Despite the reduced size, the internal structure must still meet basic usage needs, such as the installation of a squat or sit toilet and the layout of the ventilation system. Therefore, the height design must balance functionality and ergonomics.
The Double-Person Model of mobile toilets is designed to accommodate two people using it simultaneously or multiple people taking turns. The standard dimensions are 180 cm in length, 110 cm in width, and 230 cm in height (i.e., 1.81.12.3 meters), with some double-occupancy models extending to about 2.5 meters in length while maintaining a width of 1.1 meters and a height of approximately 2.3 meters. These specifications are suitable for high-traffic scenarios, such as tourist attractions and stations. By expanding the length or optimizing the internal layout, two separate toilet stalls or one stall plus a storage space can be set up to improve usage efficiency.
The Barrier-Free Model is specifically designed for special groups such as the disabled and the elderly, with higher dimensional requirements. The common dimensions are 180 cm in length, 150 cm in width, and 240 cm in height (i.e., 1.81.52.4 meters), with some barrier-free public toilets requiring a minimum length of 2 meters, a width of 1.5 meters, and a height of 2.4 meters. These specifications must accommodate the layout of barrier-free facilities such as wheelchair turning space, handrail installation, and low-positioned handwashing stations to ensure the safety and convenience of special groups. The height design is usually slightly higher than that of ordinary types to accommodate the installation of barrier-free facilities.
