Yingtan Electric Mobile Toilet

When renting electric mobile toilets in Yingtan, the power connection process must strictly adhere to the following safety regulations, and windproof reinforcement measures should also be taken in outdoor environments:

I. Core Issues of Power Connection Safety

1. Power Qualification and Responsibility Allocation
   The lessee must select a unit or individual with formal power construction qualifications to handle the power connection. Electricians must be certified. When signing the contract, it is necessary to clarify the allocation of power-related responsibilities to avoid subsequent disputes.

2. Wire Specifications and Protection Requirements
   Check whether the power cord that comes with the mobile toilet meets the power requirements of the equipment. Temporary wires should be waterproof and sun-resistant cables. If the cable length exceeds 10 meters, a leakage protector must be installed to prevent electric shock accidents caused by leakage.

3. Mandatory Requirements for Grounding Devices
   All mobile toilets must be reliably grounded, with a grounding resistance of ≤4Ω. The grounding body should be made of galvanized steel pipes or angle steel, buried at a depth of ≥0.6 meters, and the grounding effectiveness should be regularly tested to ensure that the equipment can quickly conduct electricity in case of leakage and protect personnel safety.

4. Power Distribution Box Installation Specifications
   The power distribution box should be installed in a dry and well-ventilated place, and the box body should be equipped with rainproof facilities. The power of the internal circuit breaker should match the equipment. Unauthorized wiring or overloading is strictly prohibited. It is forbidden to directly connect high-power equipment (such as electric heaters) to sockets to avoid overheating of the wires and causing fires.

5. Daily Inspections and Emergency Response
   Check daily whether the wire connectors are loose and whether the cables are damaged. After rain, focus on checking for leakage. If the wiring is aging or the equipment is abnormal, stop using it immediately and contact a professional for repair. Do not handle it yourself.

II. Outdoor Windproof Reinforcement Measures

1. Site Selection and Fixed Foundation
   Prioritize flat terrain and avoid low-lying areas with water accumulation or areas directly exposed to strong winds. After the equipment is in place, use professional ground anchors for fixation. Enhance the bottom stability through expansion screws or weighted sandbags. It is recommended to equip each piece of equipment with 4 fixed points.

2. Structural Reinforcement Details
   Check the tightness of doors and windows. When closing, ensure that the locks are firmly engaged, and fill the gaps with windproof rubber strips. Install windproof guy ropes at the connection parts and set up diagonal guy ropes at the top of the equipment to form triangular supports with the ground fixed points, enhancing wind resistance.

3. Daily Inspections and Response to Extreme Weather
   Before renting, confirm that the equipment has no rust or loose parts, and focus on checking the connection parts such as screws and hinges. Before extreme weather arrives, reinforce the exposed pipelines in advance, close the ventilation openings, and cover the top of the equipment with a windproof cover if necessary to reduce wind resistance.

4. Emergency Response Plan
   In case of sudden strong winds, immediately evacuate the surrounding personnel, cut off the power supply, and temporarily fix the equipment. The lessor should provide 24-hour technical support and arrive at the scene for inspection within 1 hour after receiving a dangerous situation notification to ensure equipment safety.