Yangchun Intelligent Mobile Toilet Specifications

No specific and clear specification information directly targeting the 'Yangchun Intelligent Mobile Toilet' has been found at present. However, the specifications of mobile toilets are usually designed according to usage scenarios and functional requirements. The following are common specifications for reference:

I. Classification by the number of toilet stalls

1. Single-stall mobile restroom: It has a length of 1.2 - 1.5 meters, a width of 1.0 - 1.2 meters, and a height of 2.2 - 2.5 meters. This specification is suitable for temporary places such as construction sites and small events. It has a compact space and meets basic usage needs.
2. Double-stall mobile restroom: It has a length of 2.4 - 3.0 meters, a width of 1.2 - 1.5 meters, and a height of 2.2 - 2.5 meters. It is applicable to large-scale events, tourist attractions, and other scenarios with a large flow of people. It can accommodate two people simultaneously, reducing queuing time.
3. Multi-functional mobile restroom: It has a length of 3.0 - 4.5 meters, a width of 2.0 - 2.5 meters, and a height of 2.5 - 3.0 meters. It is commonly seen in high-end events or fixed places for long-term use. It may be equipped with facilities such as a sink, a mirror, and a storage cabinet inside to enhance the user experience.

II. Classification by functional type

1. Basic mobile public toilets:
   • Single-person stall (independent type): The minimum size is approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height. The regular size is about 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height.
   • Double-person stall (double toilet stalls): The regular size is about 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height, suitable for medium-scale scenarios.
2. Functional mobile public toilets:
   • Accessible public toilets: The size requires a length of at least 2 meters, a width of 1.5 meters, and a height of 2.4 meters. Inside, facilities such as handrails and low-level sinks should be equipped to facilitate use by people with disabilities.
   • Maternity/family public toilets: The size is about 2.2 meters in length, 1.8 meters in width, and 2.4 meters in height. Inside, an infant care table and a child seat are set up to meet the needs of family outings.

III. Mobile public toilets for special scenarios Temporary public toilets in tourist attractions or large-scale events often adopt a row design. For example, a multi-stall mobile toilet with 4 - 6 toilet stalls has a length of about 5 - 8 meters, a width of 2 meters, and a height of 2 meters (the specific size may be adjusted according to the design). In addition, some manufacturers offer customized services. For example, the PT - 280 ordinary squat-type mobile toilet of Shanghai Luyuan Environmental Sanitation Equipment Co., Ltd. has a specification of 100010002350mm. The new eight-stall luxury mobile toilet has a size of 680024002900mm, and the bus-type vehicle-mounted toilet has an external size of 1080025003600mm.

IV. Suggestions If you need to obtain the specific specifications of the 'Yangchun Intelligent Mobile Toilet', you can combine the actual usage scenario (such as the number of toilet stalls, functional requirements, site limitations, etc.), refer to the above common specifications, or directly contact relevant manufacturers to obtain detailed parameters.