Wenchang Custom Mobile Toilet Specifications

The specifications of custom mobile toilets in Wenchang can be divided into four categories based on usage scenarios and functional requirements: basic single/double occupancy, multi-person/large-scale, special scenario adaptation, and multi-functional. The design must comply with ergonomic, material, and environmental standards.

I. Basic Single/Double Occupancy Dimensions

The common specification for a single-occupancy mobile toilet is 1.2 meters (width) × 1.2 meters (length) × 2.2 meters (height), suitable for temporary events or scenarios with low foot traffic. If additional squatting space is required, it can be customized to 1.6 meters × 1.6 meters for a single squatting position, with the toilet width meeting ergonomic requirements (≥0.9 meters) to ensure comfort.
The dimensions for a double-occupancy toilet are typically 2.4 meters (width) × 1.2 meters (length) × 2.2 meters (height), suitable for families or scenarios where two people use it simultaneously. Some products support horizontal expansion, such as 3.2 meters × 1.6 meters for double squatting positions, improving space utilization through optimized layouts.

II. Multi-Person/Large-Scale Custom Dimensions

For high-foot-traffic scenarios like parks and sports venues, mobile toilets need to meet rapid分流 (diversion) demands. A common specification is 3.6 meters (width) × 1.2 meters (length) × 2.2 meters (height), which can be configured with multiple independent toilet stalls or separate male and female sections. The standard dimensions for a finished public toilet are 12.0 meters (length) × 7.5 meters (width), including male and female restrooms and a management room, with clear functional zoning suitable for long-term fixed locations.

III. Special Scenario Adaptation Dimensions

Temporary events or mobile scenarios require lightweight designs. Compact mobile toilets made of light steel frames or fiberglass can be reduced in size to 6 meters (length) × 2 meters (width). These products enable rapid deployment through modular assembly while meeting environmental requirements such as waterproofing and corrosion resistance. The bottom drainage system design ensures easy cleaning after use.

IV. Multi-Functional Mobile Restroom Dimensions

High-end events or long-term fixed locations have higher functional requirements for mobile toilets. Common specifications range from length 3.0-4.5 meters, width 2.0-2.5 meters, and height 2.5-3.0 meters. These products can integrate barrier-free facilities, air conditioning, fresh air systems, etc., and use lightweight, high-strength materials like fiberglass for durability and aesthetics.

Design Specifications and Standards

All specifications must comply with the Urban Public Toilet Design Standard (CJJ 14-2016) and local environmental regulations, focusing on:

• Ergonomics: Toilet width ≥0.9 meters, door width ≥0.8 meters to ensure wheelchair access;
• Material Requirements: Use lightweight, high-strength materials like fiberglass and stainless steel for corrosion resistance;
• Drainage and Waterproofing: Install drainage slopes at the bottom and use waterproof coatings or tiles on walls to prevent leakage;
• Environmental Compliance: Equip with septic tanks or sewage collection systems to meet discharge standards.

Through modular design and customized services, Wenchang mobile toilets can flexibly adapt to different scenario requirements, balancing functionality and cost-effectiveness.