Toilet Movable Wall Partition Drawing
No directly available toilet movable wall partition drawings have been found at present, but the following design ideas can be referred to for assisting in drawing design:
Light Steel Keel and Cement Board Partition Wall Design
If the width or depth of the toilet reaches about 2 meters, light steel keels combined with cement boards can be selected as the partition wall materials. This design can effectively control the wall thickness while ensuring structural firmness. In specific applications, the toilet and the wet area can be completely separated, and two doors can be opened on the partition wall to achieve a function similar to that of two independent toilets. When designing, attention should be paid to the spacing of the light steel keels and the thickness of the cement boards to ensure the load-bearing capacity and sound insulation effect of the wall.
Half-Wall Partition Design
If there is exactly a wall in the dry area of the toilet, consider knocking down half of it to create a half-wall partition. The width of the aisle in the dry area should be more than 70 centimeters to ensure easy movement of people. The height of the half-wall is recommended to be set between 1 and 1.2 meters, which can not only block items on the countertop but also maintain a sense of spatial openness. The countertop can be tiled or covered with window sill stones for waterproofing and moisture resistance. When knocking down the wall, be careful not to knock it down flush with the wall surface; instead, reserve the width of the mirror cabinet for easy subsequent installation. If there is no existing wall to knock down in the toilet, it is not recommended to build a half-wall separately. Instead, consider using a cabinet as a partition, which not only increases storage space but also achieves dry-wet separation.
Three-Section Partition Wall Design
For toilets in small old houses, a three-section partition wall design can be adopted. First, confirm the non-load-bearing partition wall between the bedroom and the toilet. After confirmation, approximately 1.2 to 1.5 meters of space can be borrowed from the bedroom for the toilet. Use glass partitions or low walls to divide the space into three parts: place the washing area near the door for daily use; make the toilet into a separate small room with a door to enhance privacy; and treat the shower area as a wet area, with proper waterproofing measures taken. This design can effectively improve the usage efficiency of the toilet and meet the needs of multiple people using it simultaneously.
