How to Install a Toilet Mobile Chair

The installation methods for different models of toilet mobile chairs vary. Here are the installation steps for common models:

Installation Method for YC749 Commode Chair

1. Unfold the Main Frame and Seat Plate: Open the packaging, take out the product and all accessories. Unfold the main frame, unfold the armrests on both sides inward, and then unfold the seat plate upward. Align the holes, press the ball catch to insert, and when the ball catch pops out, it indicates that the installation is in place. Install the other side in the same way.
2. Install the Leg Tubes: Install the leg tubes onto the main frame, press the ball catch to insert, and ensure that the gear positions of all leg tubes are consistent to ensure the chair is placed steadily.
3. Place the Commode Bucket: Put the commode bucket into the commode chair, making sure to align it with the chute to ensure that the bucket is placed firmly and will not slide during use.
4. Install the Backrest: Put the gasket into the knob screw, install the backrest onto the main frame, align the holes, insert the knob screw and tighten it to firmly fix the backrest.
5. Adjust the Height: After installation, press the ball catch and adjust the height of the chair upward or downward according to the actual situation of the user.

Installation Method for YC7902S Commode Chair

1. Install the Leg Tubes: After opening the packaging and taking out the product and accessories, turn over the main frame, install the leg tubes onto the main frame, align the holes, and fix them with C-shaped clips. Do the same for the other three leg tubes, and keep all the holes consistent.
2. Install the Backrest: Insert the backrest into the main frame by aligning the holes, and then screw on the knob screw to initially fix the backrest.
3. Install the Armrests and Foot Pedals: Lower the armrests on both sides; insert the foot pedals into the main frame from the side, and then rotate them back to the front. Do the same for the other side, and then lower the pedals.
4. Insert the Commode Bucket: Insert the commode bucket at the rear end to ensure that the bucket is placed correctly.
5. Adjust the Height and Backrest: After installation, pull out the C-shaped clips of the leg tubes, adjust the height of the leg tubes, align the holes, and insert the C-shaped clips to fix them; loosen the knob screw and nut, align the holes, and then screw on the knob screw to further adjust the position of the backrest.

Installation Method for Ordinary Folding Commode Chair

First, assemble the stool by inserting the two legs. If the position of the stool is not suitable, for example, if it is too close to the back wall, you can adjust the screw rod forward to the appropriate hole position. After adjustment, test the position again. If the position is appropriate, tighten the screws; otherwise, the chair will not fold properly.