Toilet Mobile Chair Installation

The installation steps for different models of toilet mobile chairs (commode chairs) are as follows:

YC713 Commode Chair Installation Steps

1. Unfold the main frame: After opening the package, take out all the products and accessories, then unfold the main frame to ensure its structure is complete and undamaged.
2. Install the seat plate: Snap on the parking buckles on both sides. When installing the seat plate, pay special attention to aligning the seat plate buckles with the crossbar. Accurately install the seat plate onto the main frame to ensure it is firmly installed.
3. Install the footrest: Attach the footrest support tube to the footrest plate, press the ball and insert it. When you see the ball pop out, it indicates that the footrest support tube is in place.
4. Install the commode bucket: Place the commode bucket in the corresponding position on the commode chair to ensure it is firmly installed and avoid shaking or falling off during use.
5. Adjust the brake and use: Before the user sits on it, adjust the brake of the commode chair to the locked state to ensure that the commode chair will not move during use. After the person sits on it, lower the footrest so that the user's feet can rest lightly on it.
6. Pushing and getting off operations: When you need to push the commode chair, the caregiver should release the brake; when the user gets off, they should first adjust the footrest support tube to be parallel to the ground before getting off to ensure safe operation.
7. Precautions for pushing: When pushing, fasten the seat belt first. When going over a bump, use a reverse approach so that the large wheels go up the bump first, which makes pushing safer and more stable.

KJ252L Commode Chair Installation Steps

1. Install the leg tubes: After opening the package and taking out the products and accessories, press the ball on the leg tubes and install them onto the main frame. When the ball pops out, it indicates that the leg tube is successfully installed. Use the same method to install the other three leg tubes.
2. Unfold the backrest: Press the button on the main frame to unfold the backrest. Keep pressing on both sides and have another person adjust the backrest to the appropriate position before releasing the button.
3. Unfold the armrests: Unfold the armrests of the main frame upwards and then insert them into the grooves to ensure that the armrests are firmly installed.
4. Install the commode bucket and use: Put the commode bucket into the commode chair. After installation is complete, unfold the seat plate for use. If you want to place the commode chair on a squat toilet, put in a splash guard. After pulling out the armrests on both sides, press the buttons on both sides of the backrest, adjust it to the appropriate position, and then release the buttons. Then insert the armrests back into the grooves and press the ball on the leg tubes to move them downwards or adjust their position.