Specifications of Mobile Toilets in Puer Square

There are various specifications of mobile toilets suitable for Puer Square, with common types and specific dimensions as follows:

1. Single-person Standard Type
This type of mobile toilet is suitable for areas with limited space or relatively low foot traffic, such as the edges of the square or temporary event venues. Its standard dimensions are a length of 1.2 - 1.5 meters, a width of 0.8 - 1.0 meters, and a height of 2.2 - 2.4 meters. Internally, it is usually equipped with a single squat or sit toilet, a simple hand-washing basin, and a ventilation system to meet basic usage needs.

2. Double-person Standard Type
Designed for scenarios with slightly higher foot traffic, such as the main passages of the square or event concentration areas. Its dimensions are a length of 1.8 - 2.2 meters, a width of 1.0 - 1.2 meters, and a height of 2.2 - 2.4 meters. Inside, it can be set up with two independent squat or sit toilets and basic hand-washing facilities, balancing efficiency and space utilization.

3. Barrier-free Type
To meet the needs of special groups such as the disabled and the elderly, barrier-free mobile toilets must comply with strict standards. Their external dimensions are a length of 2.0 - 2.4 meters, a width of 1.2 - 1.5 meters, and a height of 2.2 - 2.4 meters; the internal clear dimensions should be no less than 1.8 meters by 1.4 meters to ensure wheelchair turning space. A barrier-free ramp with a width of more than 0.8 meters should be installed at the entrance, and inside, it should be equipped with handrails, a low-position hand-washing basin, and an emergency call device, reflecting humanized design.

4. Multi-person Type
Suitable for high-foot-traffic scenarios such as parks and large-scale events, common dimensions are a width of 3.6 meters, a length of 1.2 meters, and a height of 2.2 meters, or larger specifications can be customized according to needs. These toilets usually adopt a modular design, and internally, they can be configured with multiple independent squat or sit toilets, hand-washing stations, and hand-drying equipment. Some high-end models also add a management room or a third toilet to enhance the user experience.

5. Basic Dimensions and Flexible Customization
The basic single-person type has dimensions of 1.2 meters (width) × 1.2 meters (length) × 2.2 meters (height), and the basic double-person type has dimensions of 2.4 meters (width) × 1.2 meters (length) × 2.2 meters (height), suitable for temporary or low-cost needs. In addition, some manufacturers offer flexible customization services, such as a 1.6-meter by 1.6-meter single-squat toilet or a 3.2-meter by 1.6-meter double-squat toilet, which can adjust the layout according to site conditions or functional requirements.

Summary: The selection of mobile toilet specifications in Puer Square should comprehensively consider foot traffic, space conditions, and the needs of the user groups. For conventional scenarios, single-person or double-person standard types can be chosen; for scenarios with special needs, barrier-free types should be prioritized; for high-foot-traffic areas, multi-person types or customized designs are recommended to ensure a balance between functionality and practicality.