Specifications of Corrugated Sheets for Container Houses

The specifications of corrugated sheets for container houses vary depending on the supplier and processing method, commonly covering three dimensions: width, thickness, and length, as detailed below:

1. Width Specifications
The width of corrugated sheets for container houses is typically standardized based on the formed width or material width. For instance, the formed width of container profiled sheets supplied in Tianjin is 1200mm, with a material width of 1250mm; the width of corrugated sheets from container accessory wholesalers is fixed at 1200mm; while the width range for custom-processed container sheets is broader, reaching 1 - 1.2 meters (i.e., 1000 - 1200mm). Among these, 1200mm is a widely used standard width, suitable for the modular design requirements of most container houses.

2. Thickness Specifications
Thickness is a crucial parameter affecting the strength and durability of corrugated sheets. The common thickness range is 1.0 - 2.0mm. For example, the specification for a 1.2mm thick container corrugated sheet is “12001.0 - 2.0length”, and container accessory wholesalers also support customization within this thickness range. For higher strength requirements, custom-processed container sheets can offer thickness options from 1.0 - 4.0mm, suitable for scenarios with higher load-bearing or impact resistance needs, such as industrial container houses or temporary storage facilities.

3. Length Specifications
Length is usually customized according to actual needs, offering high flexibility. The profiled sheets supplied in Tianjin do not have a specified length limit; the length of 1.2mm thick corrugated sheets can be adjusted as required; container accessory wholesalers explicitly support “custom lengths”; and the length of custom-processed sheets is “unlimited”, meeting the design requirements for extra-long container houses or special structures.

Summary: The selection of corrugated sheet specifications for container houses should consider the intended use, load-bearing requirements, and cost budget. For standard scenarios, the combination of width 1200mm, thickness 1.0 - 2.0mm, and customized length is most common; for higher strength or special dimensions, priority can be given to custom processing services that support a thickness of 4.0mm, width of 1.2 meters, and unlimited length.